The Jalopy Journal
working part time at an O'Reilly Auto parts store for 10 years i have grown to absolutely hate dealing with brake lines. it's not because i...
you are kidding, right? you can't be serious
it's obvious to me they got the kingpin inclination wrong when dropping the axle. who did this?
here is my take on points: we fought World War Two on points. the B-29 bomber that dropped the atomic bomb had points. the P-51 Mustangs that...
this could get interesting
your chances of getting a real answer would go up if we knew what motor you are working on lacking that information , i will say sure the old...
Minnesota plates for 1929 are going to start with an A , B ,T or X. [ATTACH] ACD L29 never existed and i doubt would fly if you made one...
curious.....if it's so low mileage why do you think it needs a valve job? any good valve job would require cleaning, magnafluxing and resurfacing...
that's nice, he must of taken real good care of it. what are your plans?
i have to say that it was a shame what this country did and we must remember it so it doesn't happen again.....but i also have to say that ALL my...
i'm thinking the OP wants to know if they are magnesium or not
i'm asuming you are talking about the threads on the end of the center shaft.....what column is it?
that should be a fun car the wheels would not be my first choice
how is it possible? both of you are giving IT guys way too much credit i my experience they are usually the cause of the problem, then are given...
for Model A and T upholstery you can go here: https://www.classtiqueupholstery.com/ i've used them 4-5 times with good results, my current `28...
i don't think that is a `32 heavy
try sucking and/or blowing on that little hole in the center of the cap
Tanks recommends using a flexible line between the fuel tank and the frame , i have always done it that way. not saying you will have problems if...
i think that Bugatti would be about a million dollars now
i would think you could find a good usable Model A gas tank for a reasonable amount of money if you don't want an electric fuel pump , one...
i graduated from college 43 years ago , looking back at it now about 99% of what i was told was BS
i believe that is correct for 30/31
after reading all of this , i am glad i got what i consider a lifetime supply of steel for nothing 25 years ago. i've only had to buy a few...
i don't consider myself an expert , but i have done 6 28/29's and can say that splash apron can be a pain to fit. i suggest you get it all fitted...
you are 100% correct. if someone comes in with attitude he gets to pay the full normal price , if he is a nice guy/gal and needs a little break...
i agree with the panhard bracket not being deigned properly. you need to add a plate from the pinion housing bolts to the front side of the rod...
i guy comes into the store and wants to know what the warranty is on the ignition coil he just bought for the 5.4 in his F-150. seams he replaced...
and since i posted the video , if you are not aware of Iron Trap Garage on YouTube you should check them out.....lot's of cool interesting stuff...
Iron Trap Garage on YouTube has a video of their recent visit to Offenhauser. it has a shop tour and an interview of the owners talking about...
the way i read it the OP asked if they would clear the OUTSIDE of the frame i have no real knowledge or measurements , but using my calibrated...
Separate names with a comma.