The Jalopy Journal
I could need a little help on an issue i ran upon during final assembly stage of a 1937 Cad / LaSalle transmission, the case has been line bored...
Having run into a strange project i could need some cam related info and help from someone with a big Offy 220-255-270, or cam experts with...
[ATTACH] I have a few old special rods with insert bearings. They are 2" inner diameter and the only markings are 2891-010. Anyone with bearing...
I recently got this Nos Hupp sender and pick up unit in a trade with hopes to use it in the 32 with a 40's Stewart warner gas gauge. The beautiful...
[ATTACH] [ATTACH] [ATTACH] I have an original aluminum left side exhaust manifold for an Ardun i'm putting together. This one gives much better...
[ATTACH] [ATTACH] Hi, got this lid in a trade as it does not fit the other guy's 30 coupe. it is 35 3/4" wide X 30 1/2" from bottom lip to top lip...
I wonder if anyone can help me read the date code on a few old Firestone racing tires i have. Firestone Bonneville 16": 114 R7876 and 93 R7876...
I have found two sets of special tires for my cars and want to mount them as late as possible to avoid building scars and welding ray exposure....
Are there any other pedals that more or less will fit 1932 pedal bracket in the same way as stock pedals but are about two inches shorter from...
A few years back i bought a 1940's smooth bezel 2 5/8" Stewart Warner fuel gauge, i do have another identical gauge i can use the inner unit from...
When using a sidedrive magneto/distributor setup and the head mounted distributor and driveshaft is removed and no longer used. Will this cause...
Was there ever made a 15" widefive wheel for the 36-39 axles? with all the smal windows around the center? I`ve seen the stock centers cut down...
A month ago i was fortunate enough to find a barn full of stuff from a local Ford dealership and shop that started in 1924 and closed in 1966....
Since this carb was used since the earlier days covered by Hamb i thought someone on here might have some good ideas for my problems. I have a...
I found a set of 2" Flynn carbs a while back and cannot seem to find any good info on them, the only reference i find is a red Wayne powered track...
I`ve got a neat 56 Y-block out of a freinds t-bird. I want to build it for a model A but need some good inspiration. I remember seeing some very...
I`m working on a mid 20`s chevy steering box for a gowjob project, and it has bronze bushings above and below the screw. The shaft is 3/4" and the...
I would like to find the guy who is making the flathead and torquetube adapted t170 trans.. A search gave nothing specific, not a website or...
Need Babbit/bearing metal advices <O:p</O:p I want to start pouring babbit in 2” bearingshells. <O:p</O:p<O:p</O:p Found a local dealer...
What is the secret behind model T rear to model A trans? Should i weld a model A torque tube bell on a model T tube and use a early model A...
I need info on Model T type Buffalo wheels. I have a complete set of 3 ½ X 30 Buffalo wheels and hubs. Yesterday I was offered a set of slightly...
A while back i bought a neat Winfield book from 1932, a very cool find in itself, but when i got it home i could not beleive my eyes. Inside i...
I`ve bought a few Ford old transmissions and this is one of the pictures the seller sent me initially. He believes it is Buick but i`m not that...
Hello fellas. <O:p</O:pI just bought a model T Chassis after very passively advertising after something like it for couple of years on and off....
Need help with location of the holes for the two bolts that hold the column drop to the stock 32 roadster dashboard. Measurements may be from...
I found this device in an old shop that was active from the teens up until WW2. The old guy I got it from told me it was an apparatus for...
I have two magneto questions. I finally got around to look closer on the non working side drive magneto for the Model B engine. I checked it out...
:) Found this big box in the rafters with different Ford script hardware. Not sure if they are NOS even though the box says "NOS Ford bolts" The...
I found this tiny banjo rear axle center housing in a shed a while back and plan on using it.. Problem is i need a ring and pinion to fit inside...
I found the remains of a cyclecar in a barn 12-15 years ago but has not been able to look at the stuff until now. The front end is the regular 38...
Separate names with a comma.