The Jalopy Journal
Thanks Phil. That is the style I started out with. Probably 2pc to save material. I have the drawing from the origonal article but I made my dwg...
I have designed brackets for the front spindles on my 51 HJ and wondered if there are other brackets that would fit the 4 bolt holes instead of...
Dash/ gauge lights are fed power into the center of the socket. Current flows through the wire to the center of the bulb then through the filament...
Ottawa Ontario car built in the 70's. Survivor being updated after original owner found it again.
HJ did not do a wagon. There are a couple around, will try and find pics from years ago.
The fan control should be done through a relay so it has low amperage draw.
Acadian's are not Pontiac's. GM wanted to add another line of cars for Pontiac dealers to sell to compete against Chev and other compact cars so...
Great work. Hope to get back to the HJ by the spring.
Mounted to a plastic frame and slid into the trailer hitch tubing.
I used one the other day to move my Chevy BB into the bed of my truck and the machine shop used it to unload it. Never though of it being pulled...
manual https://www.tremec.com/anexos/TRSM-T5-0510-R1_173.pdf
Rebuilding [MEDIA]
Shifting a TKO [MEDIA]
Look on trifive.com, lots of help on there. Been so long ago I can't remember.
I have a stock length 84 Monte Carlo tilt in my 57 wagon.
Just switch out the master for a late 60's early 70' s Chevelle drum/ drum master, no other add ons needed.
Hope you get the trans sorted out. I took the tko,5sp out of the wagon a few years ago when my left knee got really bad. I saw a video about...
The bigger question is do we calculate gas millage in imperial or US gallons?
Beside the main hitch bolting to frame I added this 90* to it.[ATTACH]
I tow a 14' Bonair travel trailer with my 57 Chevy wagon. I have self levelling air bags. trailer brakes are required on any trailer weighing...
Both my 51 HenryJ's are coloumn shift. Still fun to shift gears.
My buddy has a steel building and the instructions show standoffs to attach the roll insulation to. Join garage journal as this topic is covered...
Both powerglide and the 350 have the same 1:1 in drive so there is no difference at highway speeds. The 350 just adds 1 gear before drive.
The T on the left is Bruce Compton's from Kemptville I'm pretty sure.
I have a buddy that slept in his car on the grounds overnight, security might be tighter now.
Happy Canada day to all, sitting on the dock in this beautifully country of ours.
Check out Ontario Rodders Community web page. Lots of help on here. Also FB Ontario classic cars and parts pre 1990.
There should be one large between block and filler plate and small one for pump.
I think it is a T93 Here is a kit by Novak that I might copy to adapt my Tremmic....
They say it is not the same block mount. Don't have one for the 161.
Separate names with a comma.