The Jalopy Journal
Good work
Awesome work
Nice work. I'll have top follow this thread
I had a lot of trouble with my tank after I got the car on the road. I vented it at the top near the filler but it was dificult to fill up because...
I have the trim. How close is he to the LA (California of course) area?
Is Standard Fasteners the one that used to be just north of the 5 frwy of Carmenita?
Hey Dan. Check out Sunchasers. I think they are in Pasadena, but they don't really have a retail store. You can call them up and see if they are...
Not having a lift, I used four heavy wall 50 gallon drums, two 4X4's and a cherry picker. With the front clip off, and all the interior out of it...
I heard that there were some bad batches that were too brittle and cracked. I had a spot crack on me but when I went to repair it I noticed that I...
That car would look awsome with a nice chop, layed down in the back and made into a 3 window.
Its great to look at these threads. It gets me motivated to get my honeydos done so I can get back into the garage.
The one on my brake is a cast iron slug about 8 inches long and around 3-4 inches in diameter. It's mounted at the end of a 2 foot bar. You could...
I used the brush on header paint, I think from por-15. it lasted a long time and after 3 years is just starting to look a little crappy.
I like Super clean too cause it does a pretty good job and I can use it for a whole bunch of other stuff. I was cleaning up an old amp that I just...
The guy listed this about 3-4 months ago for 1000.00 and no one bid on it. I was looking for a right rear fender at the time and was seriously...
The unit has to be elevated up off the ground so that any fumes that might collect will not ignite. I forget what the standard is but I thought it...
I dont know why there is all this bitching about the goldchainers talking shit. All I hear from a lot of guys on this thread is the same crap. We...
I hate to tell you this but there may already be a court decision against you. I'm a city employee and a few years ago someone in administration...
What are your plans for the body. They look bitchen with a shave and a chop.
A nitrogen or compressed air tank ( maybe an old scuba tank) would probably hold enough pressure to last a while if you dont play with it too...
You can make a new plate out of some 1/2 inch X 1/8inch flat stock bent in a hat shape so that the edges grab the cap but the center section is...
I might be able to get you one off of a 65 galaxy. Find out if it will fit.
Kilroy...Who did you get to do the machining on your flathead? i'm getting ready to tear into mine.
And regarding Paypal. There are two types of account. One that charges you 3% on all transactions but you can accept credit cards. The other is...
I used to be fairly active over on a cigar board. They had a link on your profile where you could leave feedback about a transaction you did with...
I have to admit that I do keep a few cans of etching primer on hand to hit small areas of exposed metal with but at eleven bucks a can it is used...
I use Del Rey Sandblasting in the City of Industry for a lot of stuff. I've had them do two full cars and a bunch of other parts. If your'e doing...
I have two springs laying around that I dont need. One is abut 39" C to C the other is about 37". If you can use either one of them their yours.
The way it was explained to me was that adding another tank would increase the volume of air you have to draw from. Of course it would take longer...
Thanks Doc. Thats pretty cool of you. I'll Donate 50.00 to HAMB Since i'm getting such a great deal and I was planning on buying this part...
Separate names with a comma.