The Jalopy Journal
Personal preference for an A is a chop. With this car, we decided just a hair would do..l”[ATTACH]
If using a set of Ford manifolds doesn’t work out for you, Red’s Headers makes a set specifically for an AV8 with a Vega box. Like others have...
Running them on our 274 flatty. Absolutely would recommend. High quality workmanship. [ATTACH]
Hank, yes tank moved as far forward as possible. As for this “A” build we had to drastically alter the front of the tank because of interference...
So classic. Watched the clips several times. Thanks for sharing.
[ATTACH] [ATTACH] [ATTACH]
Thanks for posting pics. Really nice cars we’d have missed.
11 5/8” dia. At top 10 3/4” dia at bottom 7/8” deep I got these measurements from a post here on the Hamb by “Hot Rod Pro” who regularly did this...
Not sure of Wilcap’s adapter but on my Offenhauser I had the machine shop take a bit off the inside lip to alleviate any potential problems. From...
Yep, this guy’s cars are always dead on.
SALE PENDING RECEIPT OF PAYMENT. Very nice 42-52 open drive bearing retainer/rear transmission mount 21C-7049-A with speedometer gear. This...
Jim, got these on the ‘36, from Rodtiques. They are inconspicuous and retain the stock look. You’ve seen them and didn’t even notice, so that...
Joe dropped the axle on our ‘36 10+ years ago. Absolutely zero problems.
You will not find a better person than Cory to buy from.
I talked to Flop several months ago. He said that he has been out of the car scene and fabrication business for years now. He had no remaining...
Steve, to answer question #4. They come stock from Brookville made to hide behind the dash rail.
This guy will be sorely missed by the HAMB community. 2013[ATTACH] [ATTACH]
1962, North County Speed Shop, St. Charles Rock Rd. St. Louis, Mo. Got my license and a ‘51 Ford convertible. Paid $300 for it which was high for...
That is not the short fan. See pic. This one is nice and available, PM me if your interested. Also as mentioned go with the straight linkage on...
[ATTACH]
Could be several different things, but as above poster noted I would start at the carbs first. You noted an obvious issue. If a single carb is...
Mid 60s Corvette Idler arm pulley repop?
Super nice rebuilt, unused Flathead starter which I had Vern Davidson rebuild before he retired some 10 years or so ago. Converted to 12V negative...
This is a “made in America” Mr. Roadster polished aluminum frame for model A’s, not the cheap made in China crap that doesn’t fit. My coupe is...
New Offy #5024 4 bolt intake for use with Rochester 2G carbs with 3 1/4” x 1 7/8” bolt pattern. Never used or even bolted up. For all small block...
If you put an 8ba in a ‘48 and earlier car and want to keep your anti chatter rods you will need these adapters for the 8ba block. If I remember...
Thanks, been a long in progress build. Plan to start moving a lot faster now. Plan is to have done by summer ‘22
Damn, good eye. Yes, they are the same knobs. However I had to shorten them and reduce the diameter of the bases to work with the bezels and set...
Separate names with a comma.