The Jalopy Journal
Mags were what most cars and bikes used. Cars like the model T and early bike like Indians. then they went to distributors. The mag makes its own...
Thats a great tank! Nice find. Its a Fordson tractor from england. They hold more gas then a stock T tank. So they make a nice gas tank for a hot...
You can pressure test and magnaflux and see if you can find the problem. It can be cracks or the head or block may not be flat. If all else fails...
Red-input from brake light switch, blue is input from flasher, yellow is left rear sig/stop, white is right front sig there are two greens one is...
The bolt spacing is wrong and they dont fit into the crossmember. maybe some grinding and filing out holes you could maybe make it fit. I would...
A reverse eye spring will help you lower it with out having to buy a new axle.
Early pans will give you more wishbone room. I use 33/34 ones most of the time. But I have hammered a indent for later pans too. If you take your...
John it had to be close. Only two cars really should have won yours or the Mumford T. But yours should have got it. The T looked like any other...
I noticed that there is only one car that has two pics posted on the hot rod mag site. That car would be yours John the Woodward roadster! I hope...
Is that dual fuel pumps?! Wow everywhere you look there is cool details! This has got to blow the judges minds!
Fantastic job John!! Its hard to believe its the same roadster pickup that you started with. You and the rest of the gang knocked it out of the...
Nice find! You will have fun with that! Let me know if you need any stock stuff for it..there is a little bit around here that I bought for Jerrys...
Terry you will be missed. Dawn, Dale, Greg and family sorry for your loss. We have lost a great hot rodder and friend. Seems like everywhere that...
hey that looks like a great truck. have fun with that. It was good to see all of you at the poker run
Thanks to all the Inland Emperors . We (Beggars car club) had a great time. I hope next year we (the west side) have a better turn out. It was...
That looks like alot of work .. but it will be well worth it when you get it done. Let me know if you are looking for anything. Have fun!
I have made alot of frames at work and at home. With a 32 K mamber it is alot harder to pull the trans. That can be a big thing with a early...
Thanks to everyone that came to the class. I hope that everyone had fun , meet some new like minded people and got some ideas. Even the weather...
That is Bruce Donelans roadster! Very nice car. He also built the frame under Floorboardinit roadster.
Hey! Now that will be a great car when you get that one done!! Let Jerry know what you need for it.... we will have alot of parts extra from his 3...
Sorry that you cant make it Pete. Hows the T coming?
Hey Cory your roadster is looking great! Nice job on that headlight bar drop.. the jig too! I will keep looking the trunk area parts you need.....
Hey Chris your roadster is looking great! It is going to be a geat early style hot rod. What are using for a steering box? What are you going to...
Scott Lauren is using parts off each axle.... the bells and the axles out of the 36 and the open drive center out of the late truck rear. But let...
how do you take the forward load from the rearend that the engine radius rods (ford part 6044) did in the stock torque tube ford trans and rear setup?
sure scott come over any time just give me a call
Separate names with a comma.
The Jalopy Journal