The Jalopy Journal
34 five window, stock seat, no door panels
I always bought kits from Cartouche but now mac's has taken over they won't let you talk to the guys that actually make the kits. Is there any...
I RAN A EARLY MALLERY AND HAD SOME PROBLEMS WITH THE CONDENSER. It's one of those big copper ones- hard to find. Just as a test try a standard...
Thanks for all your opinions and experiences, I think the chevy will be the one.
OK, it's not a hotrod in any way, but it has a rust-free body and a new interior,. I want a more dependable engine, horse power, economy, and...
Trey, I have a 8BA punched out to 3 3/8" it has many thousands of miles with no problems. I have noticed it gets 10-15 degrees warmer on long...
For me it's all about early engines, olds, caddy, studie, even some of the 4 or sixes. So we don't worry about the horsepower, or the money too...
street rodder gone too, electric cars here we come, ya right.
Thanks a ton, I just went to Jegs and I think a TCI flex plate #529620 will solve my problems.
I want to use a c4 because of it's small size but I'm lost as for the right converter. I have to use the 50z flex plate that came with the 302 but...
I think open cars should be a lighter color, no metallics, all one color. It's a mater of taste.
This roadster has 12volts, with a flathead 6 volt converted generator. All the early 60's stuff fits, pick up a 12volt, 30amp regulator and you...
Love it, I would drive it every chance I got.
Get to the nearest pub, order a pint of hard cider & and some rye... repeat as necessary. Hope your liver lasts longer than the cold snap.
my 31, it started out a lot like yours, just pieces. 3" haircut and bobbed the rear fenders, it come out ok. It was all done in my garage, the...
31 stock A, ( uncut firewall and a stock hood fits), with 4.3 chevy v6 and a powerglide. With the glide, the stock flat floors are usable. These...
There is a guy in Bridgeport, Charlie Nelson phone# 315 633 8653. He has original stuff, no repop. Over in Mohawk, ny, Don Roberts, mostly...
acrylic enamel with hardener works fairly will. This roadster has a few thousand miles on it and the only place it burn off is on the exhaust...
My AV8 has a forty dash so it needed to be a little longer . The steering shaft had been cut so I just welded it back with a sleeve, it's been...
I don't think we are hoarders, we just know what is cool. I scored five Flatheads this summer, about killed my little trailer getting them home....
Maybe real loose timing chain? pop the distribitor cap and rock the crankshaft back and forth to see how much play it has. Just a thought.
There's a few of us south of you too, Binghamton- Elmira area. Why would you move to upstate NY, not to car friendly, salt!
Kathie's klown
Got my license in 66, lost in it 67, 90 in a 50. Now old and slow. First car 53 chev.
Here's a new for me. I used a GM alternator when converting my 47 flathead to 12 volts, had to buy the 5/8" pulley because the engine had big...
The one easiest mod would be slap a blower on it, 3-4 lbs of boost, don't worry about the cam ,porting , polishing. Flatties can't breath, but you...
My guess would be 1941 or 42. The raised intake surface and factory releved lean towards truck or industrial. Bore should be 3 1/16". Check for...
How far is it bored right now? If you just put rings in it, and put it back together sooner or later you will be back to where you are now. I have...
Has anybody got pic's or video of the drags?
37's are plain and small if you loose the housing and just use the lense and ring.
Separate names with a comma.