The Jalopy Journal
Sounds like you want too build a "numbers matching" hot rod ace has it right get it running drive it ....
great
how about a hemi sbc
Your radius rod's ,4-bar's, hair pin's , tie rods or drag links will fail long before you have to worrie about a bent or broken axle.
i'd would put in more caster if its too light steering on the highway, IMHO vega pitman arms are too long (stock and aftermarket) for most cross...
The cheepest way is a welded stroker most any good crankshaft shop can do it, but you'll need custom pistons. if you stick with a flat top piston...
A few years ago there was a car called the Natural Gasser running at norwalk on cng. I remember the guy saying he was running somthing in...
If you have to run your plug gap at .015 your vertex need's its magnets recharged or you have a slow turning starter,yes the magnets do...
http://www.verrill.com/moto/sellingguide/sparkplugs/plugcolorchart.htm Mabe its just my eyes but , those plugs look like your running way...
i glad you got the coupe, i was running out of leads , but i still know of a few hidden treasures if that deal didn't go through.
why not find a crank shop to weld up the 283 crank and offset grind it to the 3.25 stroke.
i've had blower parts ,fuel blocks and my dads old club plaque recast. too bad the foundry i was using closed , i was getting ready to...
Elgin part # em-50 Oil Pump is listed as fitting the little dodges to the 392 and is brand new.
the longer you can make it the better , space restrictions dictate the lenght most of the time along with the amount of travel needed. you...
Well i hope you score, I've been trying to buy that car for 6 years now. The story changes when its time to exchange the cash
http://www.homemetalshopclub.org/projects/phconv/phconv.html
call better bumper in cleveland 216-441-2795 ask for Wally he'll treat you right
http://www.pulserate.com/index.php?content=product a free trial program for cone layout i use it all the time, my local rad shop said he can...
I look at the Craftsmanship, uniqueness and innovation, not if its Glass or Steel.
S&W race cars, 1-800-523-3353 they stock some but there fast on special orders,
On an old Anglia gasser i had with a ross box , i shortned the pitman arm about 3/4 of an inch , it really helped that car out.
The big issue is push rod clearance and the head stud valley bosses,but it can be done.
http://www.joegibbshotrodoil.com/
I think you should invest in a threads per inch gauge,early ford tie rods and drag links are 11/16-18
[URL]https://www.pts-tools.com
to figure any tap drill size, ex. 11/16-18 you need the pitch diameter , take 1 divided by 18 =.0555 subtract this number from the 11/16 ex....
Your going to find that places like summit or jegs will not have some of the fittings needed for a fuel injection system. Special order on that...
this seems like the cheepest and least hassle way to do it. outher than the connecting axle all junk yard parts.
yes sounds like it's dryed out , i've never lubed the rope . i use a 50/50 mix of dish soap and water. sometimes they go right in , but than...
SEMA model legislation (H.B. 391) that would create a vehicle registration and titling classification for street rods and custom vehicles and...
Separate names with a comma.