The Jalopy Journal
The generator/fan mount on this intake is off set to the drivers side. Does anyone know why? And what affect does that have on fan function....
Will a stock generator fit in stock location with Offy 1075 Dual Intake? I have a 1950 Shoebox with 1950 Flathead. I have a Powermaster Alternator...
I have a 7 tooth steering column. Just rebuilt it. Installed in car. Went to fill it with 600W oil and the Les Andrew’s book and anywhere else I...
Quick question. Will a 28/29 model A speedometer/ cluster assembly fit a 1931 model a? Are the gas tanks the same? Mounting the same? Posted...
I have read that the slightly larger end of the rear wheel cylinder should face forward. First question: What is the philosophy behind this?...
Looking for tourque specs on model b 4 banger flywheel bolts and bell housing and trans case bolts too. Any body know or have a good link? I could...
Have stock model a rear end. Fitting up 40-48 brakes. Have read all the literature on how to..... Les Andrews etc. Tilted backing plates forward...
I have heard mixed answers to the question: can you run an original Model A 6 volt generator on a 12 volt system? Want to get to the bottom of...
Where was a '32 Model B 4 cyl. Fuel filter or sediment bulb or what did it have? In line? At fuel tank? None?
So Model A Ford with '32 Tranny, '32 K member. Ok so I get the whole '32 pedals and switch the brake arm from top to bottom for my hydraulic...
Ok here's what I'm up to: 1930 Model A Pickup Rod. Original 1930 Model A Frame Narrowed '32 Center Crossmember 1932 Model B 4 Banger 1932...
I have a 1930 model a pick-up with a 1932 B motor. It has a '32 style k-member in the original A frame to fit up a '32 Trans. Trans is bolted to k...
Well I chopped the '30 Model A Pick-Up 4 inches. Roof back on looks great!!!! My question is about welding the A pillars back together. Obviously...
Ok, I'm lookin for some identification on ford steering wheels from 1932 - 1939. No Banjo stuff, just the standards. Looking to run a plain jane...
Was wondering if anyone out there can educate me a bit on what late 30's/early 40's Steering columns and steering wheels can work together if any....
Want to know the main differences between a 1928/29 Model A headlight and a 1930/31. Size diffs, shape, lens. Yes I have looked at pics on the...
So I have a 1931 Model A Rear End. Is there a way to use 1946 -48 rear radius arms? Thought this was common place on a rod, or am I wrong and they...
So in the forties, on your Model A hotrod, what was the paint of choice on your chassis? If it was black, was it more common to see a gloss, semi...
Can anybody tell me the height of the rear inner fender of a 30/31 Model A Roadster? At the center. Can't find this anywhere on the web. Thanks.
Ok, I know I'm gonna get the usual this has already been discussed, but I searched the forum for 45 min. with no definitive answer. So I have a...
Got a 1957 Ford Meteor (Canadian Ford) with a 223 six. Getting ready for paint on the motor rebuild and wondering if any of you out there know...
I am just figuring on how I am going to run the heater hose lines through my Edmund's Intake on my 235. Looking for advice.....Pics, and ideas....
Is copper fuel line legal? What about in Canada?
Do you just use a regular fuel line nut to go into 97's or do you need a special fitting? The reg fuel line nut (5/16) threads in nice but leaves...
Where does the vacuum line go on this intake. By the front carb on the top of the intake or by the rear carb on the side of the intake?
Which Alliance Vendors sell Fenton Headers for a 235 Six? Also if you have some for sale let me know!! I need some!!
I got some air cleaners that are polished alluminum. What is the best/easiest way to take them down to an original unpolished finish?
Ok..... I have an Edmund's 235 2x1 Intake on a '54 Chevy 235 6. Can I put adapters on to fit Stromberg 97's? Will I get way too much fuel? Can I...
How do I add pics to a thread or message from my computer. I don't have a url.
Hey, anybody know if I can put 2 Stromberg 97's on a 235 6 Intake? Like a vintage Edmunds? Adapters? Can it be done?
Separate names with a comma.