The Jalopy Journal
A little bump and a new price...$175 plus the ride
Hi, I have a bead blasted, reversed Corvair steering box with the pitman arm. $200 plus the ride Thanks, Pat
Purple power or another citrus based cleaner
I see guys use chip board (upholstery cardboard)
Better yet, cut the shaft to length and re-spline it. Safer, much more sanitary. oh yeah. I cut splines. See my ad in the HAMB O DEX Pat
For just light dirt and grease, Eagle 1 has a good product Pat
3X on the slower cooling, slow warm up, weld, blanket wrap, slow cool Pat
I'd go with the AOD. Setting the TV pressure is really pretty simple
Hooked me up again....Thanks Todd
Mine was bare steel with Grundy.......Cheap and easy folks to deal with
I had one in my coupester...It was surely an "armstrong" effort. Doable, but work at low speed. I ended up using a quickner reversed to reduce...
Torque. I would suggest new bolts......Buy there is probably going to be varying opinions...
Ah yes. The magazine stores....Hot Rod, Hemmings and back around the corner......
Normal crack. use thread sealer and you're good to go. Drive........
I can't think of any classic insurers that offer a policy without a locked garage..... Pat
Damn Nice! Excellent customer service too. Thanks Todd Pat
I used motorcycle mufflers with a fiberglass wrap. makes back pressure and still sounds kind of snotty.... Pat
As stated above, use the Lokar kit. It does come in black, but so does rustoleum. Make for dang sure you set the TV pressure correctly. Pat
I'd go with the 1/16 wide cut off wheels in a 4 1/2" angle grinder. Don't forget eye and hearing protection. Pat
Lose it. Not needed.
If it's a oil-less pump like my old, 60 gallon Craftsman, take a look at the piston and ring assembly
if I open the garage door and it's raining, probably not. If it starts raining while I'm in the drive way.....Keep going
I agree about the entry level Hobart, Miller or Lincoln.....Just stumbled across the Everlast ad on Craigslist. I agree with the statement of "buy...
Has anybody tried Everlast TIG welders? 180 amp, 35% duty cycle for $950 seems like a bargain....Thoughts? Pat
Short answer. Yes.
What Animal said.....
Copper tubing works just fine. Flatten it a bit, bend to suit the shape you're going to weld and weld away....
That's pretty cool. Mine is my best best friend and a hot rodder to boot. Look out for your Dad. You only get one. Pat
One of the local clubs here has Friday night cruise in. It's a freebie, but there is a raffle and a donation bucket too. Keeps life simple.
The drive shaft isn't that hard....If you can't find a local machinist, drop me a pm
Separate names with a comma.