The Jalopy Journal
The picture is not Seattle. It is Portland, Oregon as hwy 26 is the western route to the coast. And Seattle to the north on hwy 99 at the time....
As has been said the front coils have been heated up to drop the front end down, Not a good way to go. Looks as if some one repaired a rusted out...
He is asking if he can tow it with a Tow Dolly not flat towing it with all four wheels on the ground with a Tow Bar. As for speed just do the...
Ted, You won't have any problems towing it with a tow dolly. Just be sure that it is out of gear. With a stick shift there is no reason to pull...
I think I have an extra electric wiper switch for your 58 Chevy in all my extra 58 Chevy parts. I will double check and let you know. I may even...
I have a 1958 Chevy Impala Convt. With the power steering pump mounted on the the generator. They do use them on forklifts, But most rotate...
If you use OSB wood be ready for a lot of cobwebs and dirt that will stick to the rough surface and it's not easy to clean even when painted. My...
I did the same thing on a 1954 Mercury and I picked up all the parts I needed for the front end and picked it all up at NAPA. It was cheaper to go...
Just for your information, Your transmission from the 62 will not bolt up to the 302. Ford changed the bell housing to block from 5 bolt to 6 bolt...
This is Xmas morning with my brother and I playing with my Dick Tracy metal police car with lights and siren. I lost that one but picked up...
1956 Mercury was the first year for 12 volts so as stated above just use a 1 wire alt. and problem solved.
That is the style carb that we used. That one appears to be the larger carb with the 4 vent tubes. They used those alot on the olds and pontiacs....
You might want to check out the Rochester 4G Carbs as they also will bolt right onto the 55-56 T-Pot manifold. I remember that we ran them so we...
Don't buy a gallon of brake fluid unless you are going to use it all at the same time! Just buy it by the quart as brake fluid will draw moisture...
I had the same thing happen to me on a paint job back a few years ago. I had a local painter mess up the first paint job and took it back and he...
Separate names with a comma.