The Jalopy Journal
I have several small irregular parts that won't lend themselves to being cleaned with steel wool very well. Electrolysis/molasses method seems...
So I was installing my c4 onto my flathead using a cherry picker in the garage. I installed the tc to the trans, it spun fine. Then bolted the tc...
I assembled my flat-o adapter today and during mock up. After installing the crank spacer I was checking to see if the starter drive was engaged...
Can you use an early flathead generator on an 8ba? Will the pulleys line up? I want to get a Tardel generator cover but they won't work on a late...
did a search, not much luck. still have an issue. i dont have the giant c clamp shown in the green bible. haha take a look and lend me your...
I searched didnt see what I wanted. If one was to use a plastic steering wheel emblem as a hubcap medallion. What would the best way to attach...
I discovered 'those' spider webs in and around my car today out in the garage. black widows... anyway i've been doing bodywork. sanding, blocking...
I have a set of 15" 1953 Merc riveted rims. I have a set of Goodyear super cushions to go on them. I also have a set of tubes and stems.(from...
<hr style="color: rgb(0, 0, 0); background-color: rgb(0, 0, 0);" size="1"> <!-- / icon and title --> <!-- message --> like a shmuck I...
anyone know the thread and bolt size for a Ford 9" drain plug and fill plug? its a 58 WAB case if that matters, thanks.
other than aesthetics is there any reason why i cannot use brass fittings (T fittings) on a stainless steel brake hard line? I did a search and...
I need to know the length of the paint divider on the 1955 Chevy 210. I know the hardtop/convert model and the 2/4 door models are different. So...
This is regards to a 1949 Ford. the hood sticks up at both corners maybe 1/4" on pass side at least 1/2" on drivers side. smacking the hood...
did a search didn't see what I was looking for.. looking for a pic of a 49-51 shoebox with a 52-54 ford bumper. preferably front and back bumper...
First 9" rebuild here, I did a search and learned alot but didnt find part #'s. I am needing the part numbers for the axle bearings ( small...
did a search found nothing.. I have a 49 Ford shoebox with the stock 15 x 8 rear wheel with the 5 on 4 1/2 bolt pattern. I wanna use the Goodyear...
I only know that you want an oil, belt driven, high duty cycle unit..my garage Im getting into only has 110 and the panel is all the way across...
I have some 55 Catalina side trim I want to put on my 49 Ford cant find anyone who sells the trim clips.been looking online for awhile and the...
this question is for anyone with a 49 (or 50) ford tudor sedan with STATIONARY rear quarter windows.... since they do NOT make weatherstripping...
my doors sag i need to take the hinges off and beat them into shape to correct this so i was thinking of going ahead and switching to the box...
I replaced the stock partial flow oil filter on my 8ba with a firewall mounted beehive unit recently. It got brought up to me that I need a...
With youth comes inexperience and the eventual time consuming/costly repair............. I've been out there in the rain,cold and blistering sun...
do you flathead baron guys run an extended tip or a plain autolite/champion?........ thanks
going to turn the crankshaft by hand tomorrow to check the fit of the new head i dont seem to have a socket big enough to fit on there so im...
i am using heads that require the EARLY style head gaskets on my later style block. i have read the searches and found these part numbers in...
did you have to run all long studs or will a regular stud kit (short and long) work? what did you do for radiator pipes? do i need to run an...
was fishing for thoughts on the EARLY style eddie meyer intake on an 8-BA engine. I talked to Don Orosco and he said that it would work fine no...
Did a thread search with no luck........edelbrock heads 8-ba style stripped spark plug thread what diameter size/thread size helicoil do I need to...
i had heard that the little one inch fuel pressure guages are NOT really that accurate can someone outline a procedure for testing the accuracy of...
http://webrodder.com/index.php?page=showStories&pageNum=7&CID=15&search= a guy had posted this link on the msn site it goes to the webrodder...
Separate names with a comma.
The Jalopy Journal
