The Jalopy Journal
Not sure if this is your model but way be close enough to help. On page 43 is a wiring diagram and it shows a thermal switch on the trigger...
Im with you,Ill never sale "My preeeciouuus"[IMG]
28 oz. would be two full cans and a 1/3 of a third can. Its not gonna be extremely critical.If you dont have gauges, go till the low pressure...
Or the shop forgot to tighten it after the work was done!!
I put VW baffles as well ,15.00 a piece you cant beat. I recommend ditching the fiberglass blanket at just blows out and makes you itch.LOL...
When I used to cut them, would cut at the same place as end (one complete loop)to let it fit in the perch the same and would put it in a five gal...
Where are you hooking the output wire from the alt to?What type of ignition are you using?points or Hei?Was wondering how the 14 volts the alt was...
I have a Sears Craftsman, I think its around a 59' model with a rope pull twin cyl Onan.Runs like a top.
With the engine not running do you have 12+ volts on the big lug and with the key on do you have voltage on the #1 wire on the plug? If you were...
Mine is like that and I just ran a big wire from my starter sol, battery side(GM) to the lug on back of alt thats all it needs.
I have this saved in case ever need it, may help http://www.youtube.com/watch?v=pl5nm48pYFc
The valve near the radiator will be a "high" side tap, you wont want to try to charge from it the can could explode in your hand!! Do a little...
A few picked over and in a ditch.
Here is a diagram.
I used these in mine. I recommend throwing away the fiberglass cover it just blows out and makes you itch....
Lets not forget this custom work.LOL[IMG]
The 58 packard hawks remind me of a catfish.[IMG]
My 54' had it a while. My little bondo buddy is now 19.
Just a little R&R
Your kick plate between the fender and cab looks modified. from the middle of the back glass to the bed 15-3/4 from the top of the fender to...
Thankyou,Miss. Landers
Could have bought a 67 camero for 400 bucks but didnt.:confused:
I also used a Nova front clip.Never put the truck on the road and now Im doing a s10 swap on it. The little boy in the first pic is now 19 but I...
Thanks,I kinda like this it goes with my grill.LOL[IMG]
5 spd stick,yellow interior
I can sympathize with you guys with high dollar paint jobs. I dont mind touching and will let you sit in it if you ask,but Ive had a kid grab my...
Welcome from Hugo
Actually its still good to run it as a antiboil, raises the boil temp from 212* helps in blow off and water pump lube.
Is the fan load and relay load both getting its power from the ign?The fan may be feeding the relay resulting in a backfeed.The temp switch and...
Looks like there is threads on the brass to hook a line, the screw may be to calibrate or antiflutter
Separate names with a comma.