The Jalopy Journal
a lot of cool ideals here! I have found out it doesn't matter what question you have you will get answer 10 fold with a lot of other ideals!
i was thinking the same.somehow bend the bar.Use what i got. good info & ideals here tks!!
DdoubleD - I was thinking the same.I was saw a kit from speedway.Were did you get yours?
On a original light bar w/a 32 grill. looking for turn signals locations and ideals. Maybe in the bucket?
the bar is arched up from headlight to headlight. i was looking at this and what if you cut the bar close to each bucket and turn it out a 1/4 of...
With out cutting light bar.is there a way to bend , grind inside bar to clear the grill? Or am I going to have to buy a 32 bar to fit a model A....
yep! i learned that from borgeson on another build and always remember that.tks
tks for your input! I had to make my own column drop once i figured that out. I cut the column down as much as possible. I did mock it up with...
Tks!! that is a good read.This will help tks again!
need some advice.Installing a 65 mustang steering column in my sedan.I have the column cut& mounted with the end of the shaft about 1" below the...
Good ideals on the floor & column drops. Now like to find a 70's ford steering column to fit. Thinking 28"s ?
wizard, I agree on the column drop. Going to make my own. I like your ideals. I was going to install a 38 ford dash but the column hits right into...
Yours gives me an ideal. Maybe lower to the toe panel might be a better location. What column are you using?
Wish I would have known about this site before starting my project. But replaced firewall with a bitchen 4" recess firewall. Now looking for a...
man looks good! mine is also a 4" drop axle,4 bar trying to decide on tire/wheel size. Not the easiest thing to do.I like the color you painted...
Rich; I cut out the inner fender well up to the mounting bolts. How did you install back the rear bracket for the fender? That part I had to cut...
man they got a fix for everything!! going to look into this.tks
Squablow; I agree on the column! I like your dash. Real simple. Something am going for. were did you get your gauges from? I checked mac's but...
Gomez; really looks good does fill in the wells. Did you cut the inner fender well out? How is your front end set up? Wheel size?
Wizzard; the cap tube is broke off the temp gauge.Do you know of a place were I can get replacement gauges? Maybe gas,oil,amp also. I also have a...
Hey! what gauges will you be using? I picked up a 38 ford dash w/ the original gauges. I wanted to use them but the temp gauge is my problem. I...
Rich, so going with a 75, and I did cut the wheel well out to sort of tub it also. My cut is right below the fender bolts.I am hoping the tire...
ford 9" 4 link
I agree I had a tilt column laying around the shop.I have a 38 ford dash I want to section in for the dash.
Vega box 4"drop axle. Forgot to add that! I like the look of the forties. am looking to put a 38 ford dash in it.
looking to install 235/70/15 on the rear of my 31 Tudor.On an 8" rim. am about 9.6inches wide. I have a total of 12"s I can play with. 70's are...
looking for suggestions on what type of column to install in my 31 sedan.don't know if a 70 Chevy tilt column would look good. Maybe just a...
Tks guys this is a lot of good info. If I was to install a remote reservoir, tap two lines in so you would know which reservoir is low. Cutting a...
I forgot about VW's going to check that and Chryslers out also.This is the last thing to do before setting the body on for good. A LONG TIME COMING!
I have a remote reservoir that will feed the master cylinder. That way wont have to remove the cap.
Separate names with a comma.
The Jalopy Journal
