The Jalopy Journal
So in the same line as the OP what is a good flaring tool? Many suggest it but manufacturer's + prt #'s would be good too.
Be cool about the purchases you make but cut the guy in money wise. Could he be a new friend who'd like to help in your build? Is he...
Much interested in this myself. Talked with a chev mech and he said I need a 87 or newer tailshaft to get my 91 electric converted to cable drive.
Thank's for the input, is that SAAB front or rear shock's? 5/8" eye sound's good but an american manufacturer would be good too. Are you...
I'm running a rear transverse spring in my newest build. Using a '40 front spring mounted behind the axle with my home made mounts. My question...
Mat Thrasher, really like your set up but how much travel is there before you hit the spring on the frame?
Looks to me like the bones need to be swapped side to side, there will be less bending if you chose to run the spring in front as per original.
very straight forward, I like it.
cool
Don't think the question had anything to do with the drum set up, or the debate on drum to disc. I'd grab a set of calipers from a 70's -80's...
Sounds to me like your drag link is too short. The tie rod in my hand measures 2 1/8" of thread. I sure like to have only a few threads...
Pardon?
Do a search there's lots of info to look at
I made my own and the .875 OD, .625 ID DOM tubing measures 42.5" accross. This is for a '36 PU front end with 4" dropped axle and split...
Do a search, couple of threads on this already.
My .02 leave the vette for the restoration crowd and find another.....but if you buy it is yours, do what you will
Have to agree here, he forgot to put the oil in, no way he wouldn't know it either. 5- litres of oil on the work bench when he finished would...
Try out this thread, show's double flaring pretty well. http://www.jalopyjournal.com/forum/showthread.php?t=415946&highlight=flare
Can. dollar is pretty good $235.00
If the master is above the calipers and rear cylinders no residual valves are necessary. Don't know about the master off a pu, do a search I...
good looking stand's, mine's on the project list
shouldn't you be able to measure from the end of the tube at the bearing end to the side gear inside and add the amount the axle flange stick's...
I'd take the parts to your VW motor building buddy and just measure it all up. After buying a book on sizes and how and where to measure the...
What's not to like!!
Might want to check the battery cables, if the post connectors are the clamp to wire style you might not have good flow to the starter, there may...
Amazing!!
Hey Lauren, been watching your thread and the comment's for a while. In my mind it seem's like you've hit the wall, like much of us do....
www.jalopyjournal.com/forum/showthread.php?t=290555 www.jalopyjournal.com/forum/showthread.php?t=63270 take a look at these. might help
thank's for the info guy's
A buddy is changing over his "53 GMC 1/2 ton to a V8 and 12 volt's, he want's to keep the original key ignition switch, do i need to keep the...
Separate names with a comma.
The Jalopy Journal
