The Jalopy Journal
More mostly flat/angular stuff I like pizza boxes, perfect thickness.. ram board would work great too, and less greasy, never thought of that....
I have an early sbc intake that I retrofitted a pcv. Created a simple sheet metal baffle below the pcv and it draws no oil. Easy enough to fab...
Here are 80s Chevy van in my t. Friend has same in his a
Btw - The problem in my t was a wimpy 3/4 inch rod with heims. My buddy has a similar issue on his A and it was due to a small kink in his tie...
I had that as well with the spring behind in my t. Check your tie rod. Is it properly sized? Should be at least 7/8 diameter. Also note if you...
80's Chevy van front seats are awesome. Plus they are plain with no pleating or ribs. Recover real nice and look traditional. The slider...
Look into 1980's jeep radiators. I originally had mine mockup up with one. It's a little shorter than a mustang (I eventually ended up going...
Pretty cool man. I have a 33 pickup as well. Parts are scarce. Riley productions makes a few hard to fab items like lower cowl patches. Good...
Sorry for not clarifying but 57 chevy.. i searched the Danchuk site but can't find anything but the pig tails.. Got a part number? [IMG]...
recently took on a 57 sports sedan i'm turning into a mild custom.. started putting her ass end together and after bolting in the new tailight...
64-66 fit perfect ... i run one in my T... Get at least a 3 core... i'd even recommend a 4... they're cheap and available on egay or your...
i'm comming... jersey and PA folks taking rt78 be careful.. it's a mess... yesterday i hit a 2" drop at 50mph and almost lost it in my truck......
Signed title is usually proof of surrender isn't it? I just transfered my wifes late model mustang with nothing but a signed title. I doubt...
My buddy just finished a his model A truck. Went to a couple of NJ dmv's with an old ny registration and they keep turning him down for title...
Hi Guys - Did some searching but got nada, i know there is a post but i can't find it.. Anyway decided to swap the dropped superbell out of...
looks good.. now for the hard part - putting it back together... :)
very interesting.. i wouldn't mind building something out of one of those vintage nissan's or yoda's.. i'd definitely like to tool around my yard...
slotting or drilling will not make it stronger.. it is simply an easy way to lighten without reducing the strength much... the resistance of...
great pics... looks like my fellow T's made a good showing
if you go electric use a carter. simple and bullet proof. their "street pump" with a decent regulator is a hard to beat setup. don't use a...
Hre are some from my buddies girlfriend.. not bad condering she's from brazil and had never seen a hotrod before.. actually pic'd a few of my...
looks great man.. going to have alot of character. good luck..
i'll be there.. how is the bqe situation these days? Last year it was hell.. took over an hour from bayonne.. the construction was hell...
very cool.. nice to see another t comming along.. good luck
I have the coolant about 2 1/2 inches from the top of the cap, just covering the cooling passages by about 1/4". 8btdc is initial, i'm running...
<P><FONT color=#ff0000 size=4>"The pressure comes from the water expanding as it gets up to temp. The pressure doesn't come from the water...
So i finally got a chance to use my buddies coolant system tester. So, i did two tests on my motor. The first test i presssurized to 15 psi....
thanks c-9. so i guess a canister filter as a pre-filter isn't a bad idea. I was worried about cavitation... I can imagine how these shitty...
this is the style i've been talking about.. http://store.summitracing.com/partdetail.asp?autofilter=1&part=MRG%2D9706&N=700+115&autoview=sku...
fuel tank is clean but still get the occasional small debris. the inlet was being restricted by a small flake of rust, probably from the gas...
Separate names with a comma.
The Jalopy Journal
