The Jalopy Journal
Very nice set of ‘42-‘48 spindles. Kingpins are nice and tight. Bearing surfaces are nice. $150 shipped to the lower 48. [ATTACH][ATTACH]
Loaded ‘42-‘48 backing plates. Nice shape. Very light pitting. 200$ shipped in the lower 48.[ATTACH][ATTACH]
My guess would be the axle. I have a CE axle and Pete and Jakes perch bolts and they fit just fine. I believe the bolts should be .6875" or 11/16"...
rod action makes real nice bodies.
Thats pretty sloppy. When repairing truck i-beams i usually aim for .0005-.001" clearance max for a light hammer fit. Posted from the TJJ App...
got a new hypertherm plasma. pretty awsome x-mas.
For aluminium, the best ive used it A1 cutting oil.
usually we use 3/8" aluminium hard line. i either flare the end and use tube nuts and sleeves to adapt to an fittings or i bubble the end and use...
Mcmaster-carr has them in a bunch of sizes.
i didnt have a car in the show personally. i was at the untamed booth all weekend though.
our shop built the giveaway roadster. it turned out pretty badass for a car build with almost all donated parts. there was a lot more traditional...
thats a good way to destroy the corners of a drill even in mild steel. drills are made to cut. for the best results drill a pilot the size of the...
i have some 15" 40's style re-pops over buick drums. you should be fine with the '40 drums.
even a vernier calliper will do way better than a tape. you can get real cheap calipers that will do just fine for occasional use. you'll probably...
are the tie rod ends that mac's or joblot sell the same as the speedway ones? are they a little better quality or the same stuff. they are a...
we had done a set back in trade school using a jacobs flex collet chuck and a toolpost grinder. worked ok.
hes right. starrett is the way to go. slow speed, and clear the chips often. use lots of oil. i have cut 6" holes in 1" steel plate with no problems.
i like '35-'36 dashes in model a's.
crome-moly/moly/4130 generally all mean the same thing. 4130 is crome-moly steel. "41" means its an alloy of chromium and molybdenum and the "30"...
combination square set http://www1.mscdirect.com/CGI/NNSRIT?PMPXNO=1810428&PMT4NO=0 [IMG]
looks like a taper pin reamer to me.
in-floor radiant for the new shop.
that would work. you wouldnt even need to go that far away from the original hole. id say 5/16"-3/8" away would be sufficient assuming you have a...
left hand drills are the best when it comes to broken bolts for sure but wont touch a tap. you have to use something harder than the tap itself or...
if its a high speed steel tap welding on it wont work. the weld will break off. the best thing to do is find a friend with a mill and drill it out...
well ive been lurking here for a few years now and ive bought and sold a few things here. i owe it to you guys to introduce myself. im from nb...
it rolls the pattern into the work. it doesnt cut at all. the 2 rollers have opposite helixes and form a diamond pattern. depending on the...
Separate names with a comma.