The Jalopy Journal
Hey H.A.M.B. I’m getting ready to pull the old 3on the tree column Flathead trans. In putting in a C4 behind a 302. The car originally when I...
How the heck do I remove the column shifter arms on the steering column? I just want to clean and put them back on. There is an access hole....
Hey hammers Been awhile since I’ve posted...I’ve got a ‘50 2dr shoebox, 302, currently has the original trans. 3 speed on the column, that sat...
okey, so i thought id get some suggestions and ideas...Ive got a holley 4160 600cfm, .54 jets in primary secondary is vac...sitting on a 292 y...
Okay tuning 292. Have older 4v intake so no vacuum port to do a vac test while tuning mixture on old Holley carb. I get popping from headers at...
so i have a 61 ford f100 and removed the mechanical clutch and replaced with the 57-60 hydraulic clutch n slave...the master is rebuilt however...
So we always see our rides, shining or usually building...but not so much where we do most the work. I finally after five years renting a home...
Alright sure this has been discussed. What have you come up with for keeping your wide whites from cracking. Posted using the Full Custom...
Picked up a new project for the year. 46 ford bis coupe. It's in pretty rough shape however all there. It came with a volare front end and had a...
Alright I know there's threads out there but I couldn't finds anything specific. Lowering a stock banjo rear to get it draggen. Thanks. Posted...
Early morning in Central Oregon. We get some explosive rises. [ATTACH] Posted using the Full Custom H.A.M.B. App!
okay, so spent most of the weekend trying to get the brake lights to light up...this is what works, this is what i've done: the running lights,...
Alright, got long bed out of a field. It's been sitting for bout 19 years. Very little cancer but lots of surface rust. The little six isn't froze...
I have a 68 302 w/ manual tranny, has a HEI Distrib, good battery, new solenoid, new bat, starter cables, new ground from engine to frame....
Hey guys So I'm finely getting the 46. No pic yet other than the cl ones in my albums. Question is the po wanted the volare front as well as the...
so I got the wire kit from rebel...talked with them and thought I had the wiring right to the button and three post ign switch...here's what I...
so my dad is cleaning out is mess in the garage and came across this old restoration book...copyright 1961...great illustrations and diagrams...i...
pic these up off a small trade...sure are cool, not sure if these are willy's or what their off of thanks fella's no markings on them... [IMG]
okay, so thought I'd post this question outside the build thread to get as many pics and thoughts on shaving the trunk hood latch on the 50...I'm...
Hey fella's so I got rebel kit and am starting to wire the 302 with HEI distrib and one wire delco...My question is I've installed a Alternator...
Hey guys so after checking and re checking I've run into an issue the clearance between the 302 and the column shifter arms is minimal. I don't...
Hey guys, Getting the dash wired up...just one question, should I place the reducer before the fuse panel or after...Can I just run the Hot wire...
Okay, please keep the hate at a minimum, however, what does the 6 mean in the bullet grill center...I was assuming for a six cylinder???
so I picked this mirror up from my Uncles garage...He had a bunch of 57 Olds stuff, But couldn't remember where this mirror came off of...any help...
so I start tearing out the rear end to fix some rust issues and clean up the axle, also, replace the leaf pack and add lowering blocks...got the...
Recently I have been cleaning out my parents barn as it has become my responsibility to start organizing and sorting all their stuff...I came upon...
so, when you guys changed over to 12V did you change out the light switch or run a ballast resistor? I know since I'm running the stock gauges...
Well,it finally happened, I got a 50 shoebox!!...Sheet metal pretty straight, rust in the usual places, rot in inner fenders and rockers, as well...
I'm debating between 14's and 15's...however, would 14's look alright, meaning do they fill the wheel well enough to look perportional? I'm going...
I was able to pull this old grill out of the shed and prep it to sell...after blasting it and some grinding it turned out to be in pretty good...
Separate names with a comma.