The Jalopy Journal
I have to go to south Florida and will be able to haul on an open trailer anything you need between here and there . Don't know how much room on...
I have been trying to make contact with Ben and I get no response . Does anyone know or have been in contact with him .Please PM with any info .
I am getting ready for my spring Route 56 Metalshaping Event in Dennison Mn. For those of you on the Metal sites you already know how this fills...
For those that are not involved with the metal sites out there , We are having our Fall event on Oct 17-19 . Please let me know if you are...
I am looking for someone in the greater Mpls/St.Paul area to brake a piece of 3/4 thick steel 8ft long . Discount and McNeilus wont do independent...
I purchased a bunch of fab equipment in Richmond and ended up with a 6 ft press brake. I already have one so this one I would let go to a fellow...
Some photos from Dan's gathering. Per's class was great. I was lucky enough to be able to attend. [IMG] [IMG] [IMG] [IMG] [IMG] [IMG]...
If you havnt checked in on the sheetmetal sites(allmetalshaping.com or metalmeet.com) please let me know as it is imposible to predict when people...
I got a chance to get the COE inside and started getting something done . I had a guy call me last week and wanted to see if I would show him body...
Cass is out of books unless he does a reorder . However if you still are looking for one get ahold of Ron Fournier or Stan Fulton as they have the...
Set your calenders to April 25 - 27 2013 for the next metal banging good time . I am hoping that this year we are finaly going to have people sign...
I have a 1946 chev panel del. in for repairs and first off it needs both quarters made as the old ones had damage to the bead area where the...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH][IMG] [IMG] [IMG]...
I just picked up a 1951 Chev COE and trying to poen the hood .Other than the obvious outside flippers is there any other latches I am missing ....
[IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG]I was trying to come up with a different idea for adjusting my lower anvils as my old design was...
Well its time to set your calender to Oct 25-28 for more metal shaping fun . I usually have it the weeked after the Twin City Roadsters swap meet...
I picked up some fenders from a freind who thought maybe Lincoln but I cant see anything identifiable .The braces look like something that may be...
I am back on the Triumph and they no longer make the toe board panel for the drivers side . So I made one that is a mirror of the passenger side...
In getting ready for the upcomming metalmeet I was running out of room for a couple of the guys that were unsure of comming. A freind just swaped...
Just as it says Per will be there the whole time and Cass will be there on Fri .
Like the title says Its that time again for all you metal heads that want to get together with like minded folks and share the skills of...
Those of you that are not on either metal shaping sites , Cass Nawrocci has published a book on metal shaping . The name of it is Any Imposibility...
Cass Nawrocci will be at the Meet on Saturday with his new book .So those that havnt met him or want to save on shipping here is your chance. If...
<HR style="BACKGROUND-COLOR: #abb9d1; COLOR: #abb9d1" SIZE=1> <!-- / icon and title --><!-- message --> Larry (green53ford) will be doing a...
Well its that time again getting ready for the Fall meet.I have chosen 10-20 thru 10-23 as the date.Those that have never been to an event,and...
I finaly got lazer sights on my louver press.A freind brought over some feder panels for a nova and they ended up taking pictures ,so I thought I...
<HR style="BACKGROUND-COLOR: #abb9d1; COLOR: #abb9d1" SIZE=1> <!-- / icon and title --><!-- message --> I was able to upgrade my ability to shear...
Getting ready for the big event at the end of the month so I thought it was time to finish up the updates and get color on my Ewheel.I installed...
<HR style="BACKGROUND-COLOR: #abb9d1; COLOR: #abb9d1" SIZE=1> <!-- / icon and title --><!-- message -->...
Like the title says show us your different ideas for organizing your dies,either machine mounted or wallmount.Maybe a wheeled unit for those with...
Separate names with a comma.