The Jalopy Journal
What flange would be on my 65 F100 9" ?? Small Ford... Big Ford... Big Ford new style ?? Has 5.5 on 5 bolt circle, axle retainer nuts are 3/4"...
The Space City Cruisers an other Car/Truck shows have opened up Catagories a whle back, slowly ..... but needed for Foreign ( some call ricers )...
I am just glad that Folks still build rides that they like ... My 65 F100 has a rake, big an littles...... Ricky.
I left an autolite 4100 carb body in a 5 gallon pail of NAPA carb cleaner, the new stuff Forgot it was in there, several months It is dark grey...
BUC-EEs on I-45 in Texas has several pumps with non ethanol They are around 30 miles from Galveston Isle, lots of boats on trailers get fuel...
I believe RB wants to know about the second ring gap mostly ...... QUOTE: This factor would put my "ideal" top ring gap at .017" - .018". I'm not...
31" glass packs, 2.25 inlet/oulet ... tail pipes end right before mufflers They are a zillion old and starting to rust, I painted them 5 or 6...
I bang the bases of all 4 stands on all 4 sides.... sometimes they will shift a bit and then set flush Then I push on the front and back of the...
Joined 2008 Ricky.
Remember goin to Auto Parts on Telephone Rd an askin for a case of oil Guy brings out 12 quarts, I said I need a case, he says, is a case 24...
I will ask around an keep my eyes open for a set Ricky.
I read they do steer easier an can see why The consenus I read on the negative was stopping and starting put back and forth pressure on the...
Darn... Papa bought a 32' Vicky new in 32, when Daddy came home from the Pacific after WW II He bought it from Papa.. Rocket Olds, split...
Those have .001 extra clearance over stock Clevite MS1110H10 is for a .010 under crank, I read Clevite discontinued the .010 under I recall...
Guy that built Shaky Puddin '55 Chevy IIRC, said he lost 200 lbs by goin tube axle...
Front looks fine ta me .... would raise the rear a few inches perhaps .. That said, is fine the way it is Ricky.
Congratulations !! .... great fellin indeed .. Tell the previous owner ta heal soon an well ...
Looks like a stiffener rod with the bushings The elongnated bracket with the open hole looks like for a lock out No clue as to what the trans is...
How many PSI do ya wish it ta hold safely ?? Ricky.
In the early 60s corvette forums, most said 3/4" Edelbrocks seem to all be 15/16" There were 2 different needle and seat styles ... perhaps is...
The BW O.D with R11 in a 66 F100 I bought would jump out of second gear The rear rearing was worn and you could seperate the input from the...
Hangs head .... never watched it.... that said, I have only owned a tv for a few weeks That was over 32 or so years ago, went to a few drive in...
A long time ago in a different Galaxy ...we used ta street race on Tewantin Street on the other side of Hobby Airport, several folks would block...
Darn .... have not moved back to the country yet and no shop But if close, would grab all those .. look on the flat spot by the distributor on...
Knew of a 1970 LTD that lost 3 hubcaps on the right front wheel Was the wheel.. Are ya losin them on the same wheel or ?? Ricky.
I have Holley 80457-1.. the rear seat is not sealing It is an older version than the ones on Holley's site Also have a fairly new sealed pack of...
Thanks Scott, sent a PM back ... Ricky.
Darn ... I forgot how to access PMs ... or it has changed .. a bit of advice please Ricky.
I can pick them up and strip them down and take them where ever you wish Send me a PM for my cell #, perhaps get with the seller to call me as...
I live in Friendswood, right next to Webster ( before they get sold ) is it front and back seats or 2 buckets. or ?? You want someone to pack...
Separate names with a comma.
The Jalopy Journal
