The Jalopy Journal
I want to sell a traditional 32 3W hot rod (originally built by Vern Tardel) and reach all potential Scandinavian buyers. Apart from Ebay US and...
I want to sell a traditional 32 3W hot rod (originally built by Vern Tardel) and reach all potential Japanese buyers. Apart from Ebay US and the...
I want to sell a traditional 32 3W hot rod (originally built by Vern Tardel) and reach all potential Australian buyers. Apart from Ebay US and the...
Build pics are here: http://www.radrides.com/proj.htm
Yeh Bruce is very good - did some SW 2 5/8 gauges for me. Knows the early SW stuff really well. Bruce Abbott Abbott Instrument Restorations...
http://www.nz-hotrod.com/COMING-EVENTS.html If you are interested in any specific event(s), maybe post on here and someone should be able to...
[IMG]
Perhaps we should take note of the line "...when drums are vented properly, so as to eliminate balance and material integrity problems..."....
Your NZ licence will be fine.
Don't want to sound like an arse, but if it's a hot rod related trip, rather than just a general check out the States trip, the first thing I'd do...
Belongs to Bob Anderson of Huntington Beach, Ca. http://www.jalopyjournal.com/forum/showthread.php?t=98928 There are some pics in Rodders...
I brazed a 90 degree fitting into the top of the tank, put a small round hole in my trunk floor, screwed another fitting into the top of the wheel...
This is the best advice - maybe your shipping agent will allow you to send parts to him. Otherwise you will spend all your trip time looking...
Completely disagree - I got a trunk lid and the curvature was MILES different to my orig body. For trunk lids my advice (now!) is to buy the inner...
My view - if you can find a single example of it back in the day - it's allowable as period correct. Kinda like the independent front...
Smiths were in all the English cars that we had out here in New Zealand when I was a kid - 1970's, 80's...Jags, Triumphs, MG's etc They are good...
+ see Rodders Jnl #10 for a great article on early SW gauges.
If the speedo has an odometer, then drive say 10 miles and see what distance the odometer gives you - thats your conversion ratio. And the only...
#31 - great balance Calori 36 Coupe - probably one of the top rods/customs of all time Clone of the Big John Mazmianian Willy Coupe Trad...
This thread has the blueprint for 32 5W hot rods (incl 600x16 and 750x16 tires): http://www.jalopyjournal.com/forum/showthread.php?t=110979
All you have to do is type "dash" into the search - http://www.jalopyjournal.com/forum/showthread.php?t=303543&highlight=dash&showall=1
If you want genuine traditional - watch Ebay for a Hollywood light - you should get an NOS one sooner or later - 6 inch ones for 40's style, 4...
Steve Sellers http://profile.myspace.com/index.cfm?fuseaction=user.viewprofile&friendid=139415657
Another outfit is: http://www.licenseplates.tv/cat/usa_state_plates_1.html?osCsid=e734b9bd3742efeb680b3883f97cf973 You could also use either...
Not sure if he does open drive - Derek's email is [email protected]. If he doesn't do it...you can get conversions...
Here is the Kiwi's guy info. http://www.jalopyjournal.com/forum/showthread.php?t=125189 If you don't want to dump a load of horsepower...
well if you want 50's style in a coupe and all black leather...here's the one in Jim Busby's old coupe (his was black naugahyde). [IMG] +...
[IMG] [IMG] [IMG]
you aren't kidding !!! I tried to clean my tank out to weld in the notch for the qc - all this sealant shit came off the inside and got stuck in...
Not necessarily - yours will probably fit. I recommend buying just the inner skin and then getting a local sheetmetal wizz to fit an outer...
Separate names with a comma.
The Jalopy Journal
