The Jalopy Journal
[ATTACH] [ATTACH]
Sounds like it striped the input shaft out of the forward clutch drum.
Drop the pan and make sure the manual valve is lined up with the linkage. When you move the external shift lever you should see the valve move in...
[ATTACH]
Here is mine.[ATTACH]
Merry Christmas to Bruce and Everyone!
Check vacuum at the modulator. Make sure the rod is in the modulator. The 1-2 shift is controlled by the modulator.
I just thought of something else. The valve body has thin paper gaskets between the valvebody, separator plate & case. You might drop the trans...
Rev is a set of clutch's in the alum glide. If it has low & high gears, the planetary is ok. It is something in the rev clutchs, blown seal or...
What year is it?
Make sure the detent linkage rod from the carb to the trans is pushed to the bottom when the carb is at WOT. If that is OK then pull the vac...
I am still trying to figure out the picture posting thing. These were supposed to be full size. Back to the drawing board.
[IMG] [IMG] [IMG] [IMG] [IMG][IMG] [IMG][IMG]
Drop the pan & make sure the manual valve in the valvebody is lined up with the inside linkage. Sometimes when you have the trans out of the car...
Try this site: http://nolimit.net/Instructions/trailing_arm_install.pdf
Separate names with a comma.
The Jalopy Journal