The Jalopy Journal
Ok this is where I am at. I have a thumper cam in a SBC with a 600 CFM Edelbrock Carb. The car has a automatic 350 transmission. I installed the...
Hi Guys, So these are the things that I have done so far or have access to but I need your help. I have installed a 1994 four bolt main 350 TBI...
Just installing an aluminum intake on a 327 small block chevy. I wanted to know the torque spec and what grade of bolt should I use? Thanks Jay
Hi, I timed my 327 sbc today. I installed a MSD timing tape and plugged timed port vacuum line on the carb. I got the engine to operating temp...
Hi, I have a 1965 327 in the 55 and I am about to machine the hole in my intake for my oil filler tube in the front of the intake so that I can...
The chevy is a stick car and I am thinking about installing Line Lock to heat up the tires at the strip. The brakes are manual drums with a dual...
Every small block was in a corvette right! lololol Just wanted to get that out of the way. So these are the numbers that the motor has from the...
I know my limits and I have hit them with this project. I am currently thinking of putting a straight axle in my chevy and I was wondering if...
I have always wanted to own a 1941 willys but have you seen the prices? I can't touch a steel willys and probably never will. That is just how...
Hi, I am just about to rebuild the front end of my 1955 chevy with all new bushings and ball joints and since it is all going to be apart I was...
Hey guys I am putting in a non world class T5 transmission in my 1953 Chevy. I have a T5 out of a Camaro and I am looking for the proper flywheel...
Spending some quality time with my cooling system over the last little while and getting it all sorted out with the help from the guys on here has...
So some of you battle cars that run way too hot I am battling the opposite. My chevy has a 180 degree thermostat with an aluminum rad with an...
I noticed that after firing up the 55 chevy in the driveway and letting it run for 5 minutes and then going back in the house and checking under...
I am running a brand new replacement an aluminum rad in the 55 with an overflow bottle so that it is a closed system. My old rad cap for the stock...
I have been running a regular battery in the trunk of the 55 for the last few years. It is a regular style battery with a vent at the top and it...
Hi Guys, I have been looking for some possible options for front shocks for the 55 chey in my avatar. I am still running a coil A-arm suspension....
Hi, Well this year I thought I should take a look at reducing the wheel hop that I am getting under hard launch in the 55 chevy. My current...
Hi, I have a 1938 chevy coupe that I have recently bought from a family friend that passed away. I would like to install disc brakes on the 10...
Hi, I am looking to change the worn out 350 auto transmission in the 38 chevy and I am looking at installing a 700R4 transmission. I want the car...
Hi Guys, I am looking at a SBC motor that is in front of me and I am trying to figure out what it was in before it made its way into this 1938...
Just want the thread title says I am looking for a good short style water pump that will fit my 1965 sbc 327. I am looking for something reliable...
Converting an old road draft system in a sbc to new PCV system. this piece goes into the back of the block in the hole by the distributor. Ok I...
I am just starting to learn more about the chevy coupes and I was wondering if a 1937 chevy coupe grill will fit a 1938 car? Thanks Jay
Hey, I have a 65 327 sbc and I wanted to know if I have to run a baffle under the intake when I install the PCV in the road draft tube hole at the...
Hi, A couple weeks ago I was asking some questions on the HAMB about getting my 1965 327 set-up so that it looks a little more period correct....
Hey Guys, It seems that in the last little while a lot of cars are being stolen by car thieves so I thought I would start this thread to possibly...
Hi, I am installing the PCV in the back of the engine where the road draft tube was with what I learned in a post a few weeks ago on the HAMB and...
Separate names with a comma.