The Jalopy Journal
That does look just like them. Would like to see them side by side in person...
March Performance makes Billet aluminum brackets for the flathead, I doubt they would build them if they didn't hold up. I would make sure it is...
Going to that high of a gear, you are going to lose on the take of quite a bit. Not real sure how bad your rpms are without knowing your tire...
Magnetic Springs here, NW of Columbus.
Carbides should have a faster removal rate than abrasive rolls. Is your carbide sharp? Abrasive rolls should work well to smooth out after the...
The seal is likely serviceable, as Unkl Ian pointed out. The key will be to determine why it is leaking. If the seal failed, a new seal will...
Explain "dead", won't crank, will crank-won't start????
The new T5s are beefed up quite a bit, I guess the old T5's spontaneously disassemble when used with high horsepower applications. I have had...
Jegs has some dual exhaust kits, some with, some without mufflers. They may have something to help you out.
I usually scrub it with Dawn dish soap and water, and if that doesn't clean it, I hit it with a light acid solution for cleaning aluminum. That...
Awesome!! Glad you got it back!
I wish it was in my neighborhood, and I have some room for it... I like the fire trucks!
Consider reworking your trunk floor to allow the Mustang tank to drop in and bolt all the way around. My 63 Falcon is similar, and there are no...
To determine the spring rate you need for your application, you need to weigh the front end of the vehicle. The shocks, if they are adjustable,...
...and to know how to properly maintenance the so they work properly when called upon...
If it makes you feel better, while working at an agricultural dealership, our Snap on man brought in pics of a pending insurance claim from the...
The tape will look bad, draw and hold moisture and dirt, and peel off on one of those runs down the road... I agree with prewarcars4me on this one.
Very informative, but I see a flaw...I have yet to be able to find a high temp primer, what keeps it from peeling?
You might look over the MSD, the MSD box senses the rpm from the distributor, and may not be sending a signal that is compatible with the tach.
Wheel vintiques trim rings are all stainless, if I am not mistaken
Sealed Power which is part of Federal Mogul.
If you go to Jegs.com and look up a Grant steering wheel, down in the overview box there is a link that will take you to the adapter chart, it...
Very cool!
If you are just nervous because you have never done it before, then just do it.... If you never try anything new, you will limit yourself for the...
When you break down a tire size, we will use 235/75r15 as an example, multiply the first number by .039 to convert it to inches. Then you can...
While .480 lift would be mild for a BB, it is a pretty decent lift for a SB. It is not radical by any stretch, but certainly is over stock by a...
The big tea bags full of silica are available for keeping the moisture out of it, but I agree that the attic is a bad idea. The oil idea is a good...
You might check with Wheel Vintiques.
It is looking good, glad you can at least still enjoy the hobby, even if you can't do a complete build..
Ok, first, the reasoning behind switching the positive lead: If you get a short, and you "disconnect" the ground, you have not fixed anything. The...
Separate names with a comma.