The Jalopy Journal
For Hudsons with a twist. 1953 Hudson Hornet, 360 mopar 727 auto discs all round cruise GPS etc etc. Also next up and a day in the shop 52 coupe...
Here is the deal. Because my 360 has the famous christmas tree vacuum hook ups and I have an offy dual port intake the xmas tree gets in the way...
Toe in. Raise car set A arms on jack stands holding vehicle weight. approaching the wheel from each side. put a pin or needle in the high part of...
Here are my observations re your paint. 1. Panel temp is a little low if only doing a jamb and do not have heat use a heat lamp to warm a little...
At what ponts mph should 727 change gears. Mine appears to be changing to early in drive at 35 mph. How do I adjust to change later. Do I adjust...
Just finished rebuild of 360 mopar broke engine in as required. Have a tick that seems to come and go. When starting out in first 727 auto then...
So in a nutshell chane oil check for silvering in it put in 20/50 then start engine remove cover put pressure on lifter with wooden end of hammer...
I will check valve height closed and compare? When i removed rocker cover I was able to compress lifter a little pushing hard.
No additives at all Should I have them?
I have mopar 360 1984 total rebuild. Lifter noise on number 1 cylinder have done 3 separate 15 min run ins to normal operating temp. Set throttle...
Been into cars all my life 53 Hudson Hornet 4 door sedan 360 mopar 727 auto. Built everything myself. Next project 52 Hornet coupe
Separate names with a comma.
The Jalopy Journal