The Jalopy Journal
few more from early on
a Few more Pic's
Just got my 34 Ford Pickup on the road after a 5 year build ! Things only went as fast as the money came in. I have 300 miles on the ticker right...
I have been thru this cut-down process with my 1934 " BB " pickup . Not quite the same but close enough to let you know it is very possible ! Here...
I to have used the Hot heads alternator mount on lower RH (Passenger side) then used the Hot Heads PS Pump Bracket on the LH Side. Used a 95 Chevy...
When I was about 12 ( in 1980 ) a neighboring abandon farm had an unfinished 33/34 Ford Pickup Hot rod in one of it's wagon sheds . I spent many...
Yes , Heavy Truck frames will work fine but there are some major differences so expect some extra fabrication. Having been thru this in the past...
3 1/2 Inches
My pickup a few years ago in the mockup stage .... Soon to be finished.
My current project.
My 18 Spline A833 has been resting for a few years but will soon be transfering torque to the Detroit Locker !
My Covers , Lettering still needs contrast painting.....
Tail Down works fine for me !
Here's my home built multi-year project.
Here's Mine .... Very Basic Design ....
My favorite Two .....
My 34 Ford Pickup during Mock-Up .
I've got quite a variety of vintage Willys but here are my Two Favorites. 1946 Willys-Overland Wagon has a Buick 430 , Turbo 400 and Dana 44's...
Some pic's of my project. Nothing like starting with the Blower and Carbs ... then Building a Hot Rod around them !
If you really want a 32-34 cab.... Hold out until you find one nearby. As you may know, Projects are a lot of work. I find it easier to...
<TABLE class=tborder id=post3613899 cellSpacing=0 cellPadding=6 width="100%" align=center border=0><TBODY><TR vAlign=top><TD class=alt1...
Here's my unfinished project ....
Here's what I plan on running on the street , with some exhaust an tire changes .....
354 Hemi / Weiand 6-71 / Chrysler A833 18 Spline "hemi " 4 speed . Soon to be finished ... but not soon enough
Mabey not exactly what your looking for ... but here's my 46 Willys Wagon.
My Favorite Place is " LB Metals " Moses B Glick Llc (L B Metals Inc*) 58 Hartz Rd Fleetwood, PA 19522-9382 (Reading, PA Metro Area)...
Thanks for the Tip about Quartermaster. I gave them my transmission and clutch specifications and their Street Release Bearing # 721100 will work...
My first hot rod build was a 48 Dodge Club Coupe . Bought the 48 Dodge for $ 75.00 ( Rust Bucket ) . Got a free donor car for the Drivetrain. ( 68...
Calipers & pads are Willwood. All other items are from Wintec. Unsure what Pete & Jakes has.
Got my Replacement rotors awhile back and this set is much better. One Rotor at .007" and other at .009" . Vendor was Jim Wilkos at Wintec...
Separate names with a comma.