The Jalopy Journal
YES, Got a deposit on this 57 last night, hopefully he will complete the thread as he completes it. What I found in the 327, I white greased...
2/17/2015, Deposit accepted on this truck... thank you.. I did Oshpho the hood and fenders to kill the surface rust, shot some rattle can black...
(DEPOSIT ACCEPTED on this truck.. thank you) or best offer (some jiggle in that price right now). I got too many projects going on. Took on...
YEAH, motor is coming back out. (Bummer) I feel like a shot of liquor or a case of beer.
Afraid it has some broken valve springs. After moving it to the front, it could get no traction in the wet grass. No rev limiter.. Some valve...
NEAT idea Rusty... A guy here in town heard I had a new V4 air compressor.. and showed up with a neat rig a vacuum and "media blaster" here. He...
(SOLD) NEW price, Jessie (owner) mother just died, he buried her yesterday. We are thinking right now of shooting some primer-paint and sticking...
Yes, planning on it. I had a ramsey winch in a box behind a 41 chev bumper, it has a guide there on the front. Also mounted to a 2x2 to go onto...
I went to a guided overhead helve. You can "trust" where the die is going to come down and hit and work with much more confidence. (note...
I built many things using a "Rigid brand conduit bender". I am a big man, with a big foot, used a long handle. A 1" conduit bender will bend 3/4"...
Hi,... First round of the TPI went to a virus, or TunerStudioMS error.. I pulled all the work, harness, TPI and parts out of the truck. I put...
NEW toy, I have been working to perfect it's operation, NOW stacked into a more compact footprint, I cut the gearbox off, put a pulley off a...
O2 sensors screwed into the stainless headers, copper-shield on the threads, I hunted and hunted the speedometer drive for the mustang T5, Not to...
2/17/2015, SOLD... Thank you.. Belongs to a local buddy who is building a Harley, needs cash to buy parts, so his truck is up for sale. We are...
A stone guard in front of that aluminum radiator, it "NOW" has a 7qt oil pan on the 327 since I obviously can't get a gasket to seal on the...
She is "Back in black", the "raw" doors and bullet holes are primed, first coat. Lots of bodywork to do. It will not rust down around my ears...
Removed from a project vehicle to install long tube headers. I think they are stainless under that brown patina. Were on a HO 302. Can ship.
SOLD locally... thank you Supposedly came out of camaro, has a twisted bellhousing and a shifter sticking out the top. You tell me?? has a 14...
Blind man welding.. the tig work putting the AFR sensor bung in the stainless header was horrible. I had to cut a thicker plate, dance the arc...
4-barrel Offenhauser intake is bolted on this 327.. I came up with a virus, a error?? on MSTUNE to make the megasquirt EFI-tpi work.. Through a...
A thought.. I may call later today. So, Brindle brothers auto parts in Dalton Georgia. In the early 80s I was married to a blond that kept me...
So I am a 57 year old man, my eyesight varies from one day to the next. I have "four carburetors" tore down here now. "Pissed off at ethanol" is...
I ditto 1/0 welding cable, Carry both sides to the front if you are moving the battery location (learned that on a race car), you can also ground...
Mounted the "dodge" radiator on the test engine stand handle that lifts off.. it is mounted with the two pins in bottom and two bolts. Not sure...
http://www.youtube.com/watch?v=uW03VD_KJxs My latest build, a 1965 327. Hard for me to think there is much better than a small journal 4" bore...
http://www.youtube.com/watch?v=uW03VD_KJxs THe 327 running with a Demon race carb on the test stand. The 327 today as I was "figuring" out what...
Sucks all the gas that Demon race carburetor can give, no black smoke. HITS it from 700rpm to 4000 in a split second. Revvs quicker than anything...
Finally found a use for a wore out 305, a mock up block.. built me a engine test stand since the wife got upset about the other one. Another...
The 350 got out. The 1965 327 is sitting in as of yesterday. Not bolted in yet. I was having a bad day yesterday, was hoping to fire it up. The...
I drilled the hole through a "squared" block, then drilled the first 1/2 depth to 3/8" hole, this centered the tap as it started in the hole, no...
Separate names with a comma.