The Jalopy Journal
Anyone have an older Crane Cams catalog that can list the specs for a Nitro F-560 grind? Cam is a flat tappet solid lifter, engine family is...
Complete set to adapt a short bellhousing 1955-58 Chrysler hemi to a GM hydramatic transmission. Includes the CRAGAR #407 adpater, crankshaft hub...
Anyone have info / pics / parts for the camshaft 3/8" hex drive spud that is added to the front end of the cam to drive a hilborn / enderle pump?...
I have an old Zoom pinion depth micrometer and it has worked perfectly for the Dana 60 and 8-3/4 work I have done so far. Well up till now that...
What are you guys running for spark plug tube seals? I'm not talking about the stock rubber rings at the valve covers - I'm talking about...
Perfect for a vintage dragster build, a 57-64 olds / pontiac axle housing that has been narrowed to 38" flange to flange. No center section, no...
Most "car-type" guys in the Milwaukee area know about the Quaker Steak and Lube car show / cruise-in in New Berlin most Thursday evenings......
I have offerred accurate early hemi tech help to others here, and now I am the one needing some help. Looking for some help on adapting an...
Anyone have an old ambulance near the upper Midwest? Looking to rent / borrow an older one (1940's through mid 1960's)to use as a prop in the...
I have a really good friend who is driving to the 10th and final Hunnert Car PileUp early Saturday morning. He is looking for a passenger to...
I am looking for any information anyone may have from Magnum Racing Engines which was a Speed Shop here in Milwaukee, Wisconsin in the 1960's. I...
OK, on this older Mack truck there is a big GM alternator on the 855 Cummins engine. The alternator is much bigger than a 10SI, I think it is a 27...
Anyone have an ISKY catalog listing the RR505T cam specs for the 331/354 Chrysler Hemi engines? My catalog isn't old enough. One more...
What would a 1957 Chrysler Saratoga use engine oil pressure (through a solenoid) to activate/actuate? There are three hoses connected to the...
Located some in a Wisconsin junkyard that will be crushed soon. Anyone looking for some?
Pulled this out of my 354 Chrysler industrial... that cylinder must have been hydraulic'ed (with water) at some point. The engine had an unknown...
Have a couple of 1964/65 MoPar AFB carb's that do not have the weighted air valve on the secondary side... I mean they never had one from the day...
I did a search on quarter elliptic + rear suspension and checked all of the 19 matches... but none answered my questions. It seems everyone...
Already did a search on this, but couldn't come up with much. Searched at the HCPU as well, but most cars there that had parallel leaf spring...
Who has any "tricks" for freeing stuck carbs? Especially carbs with aluminum bodies and steel shafts... I got a matched pair of 1964 AFB's that...
The tag says: RUG CL CH23 D8UREA 0531A What is it? Is it a good one? My experience is with the NP833, not the top loaders...
I am no computer expert. Only know enough to screw one up I guess. If this were a carb or a transmission problem, I would have had it fixed it...
I've got an 8-bolt aluminum flywheel designed for a two-plate clutch. I confirmed the bolt pattern matches the hemi crank. The corresponding...
Can anyone supply a pic of what the rear main seal surface should look like on an early hemi? I've got a (marine) crank with a pitted rear main...
Anyone converted a marine or industrial hemi for street use? How about one that does not have water outlets on the front of the heads? My...
I have a lead on a 1956 331 Chrysler Marine engine. It is the 200hp@3800 version (2x1bbl carbs). Anyone know the lift/duration of the solid...
Most likely will be pulling an empty car trailer from southeastern Wisconsin out towards Deleware in the next week or two. Any HAMB'ers need...
Have a 168 tooth chevy flywheel cast # 14091599... WTF is it? It has an offset weight cast into it, so I'm thinking external balanced engine.
There was a good thread of model A coupes a while earlier, but I'd like to see just how many other people have coupes that didn't roll down...
OK, I have a question that someone here most likely has the answer to. Has anyone heard the same engine run with zoomies as well as with headers...
Separate names with a comma.