The Jalopy Journal
Flathead fan, spins freely $50 plus shipping Dropped axles - one is Model A, the other is a 33-36. Both are straight, holes are good. $275 each...
Is there a source out there for a cut to length torque tube driveshaft? I remember reading about one a few years ago, maybe Dick Spadaro(?) or...
Time for a build thread for my '27 Model T RPU. The car is on the road and nearly done. I plan to post a ton of pics and some background....
Any idea what box the larger one is? I think the smaller is F1. I am trying to do the tardel conversion but want to use the larger one. Not...
1936 Ford spindles. Been lightly blasted and could use a bit of degrease. Threads are good. $85 plus shipping
Split bones. I bought them awhile back but am not going to use them. Bungs are welded in but need to be ground down. Threads are 3/4 - 16....
1940 (I think) Ford generator. Was rebuilt in September and converted to 12v. The rebuild and conversion was done by Van's Electric here in...
Dropped axle, 32-36 non heavy type axle. I bought it awhile back but am not going to use it. It looks like about 47" between kingpin centers. I...
Working on the AV8... I have the Model A steering column partially apart, but not sure how to get the rest of it apart. I have the nut off of...
SOLD Selling my 1927 Model T rolling chassis. It is all for sale, EXCEPT the body and bed, I am keeping those. Details below. This truck runs...
I have a stockish 27 Model T I am going to turn into a hot rod. I would like to go 292 Y block, C4, and a mustang 8" rear. This would be on...
I have looked through a million threads trying to find whose this is... any leads? I have a '27 RPU I want to transform and I am wondering if...
I am building an AV8. Going to use an unsplit 33 wishbone. Fabbing my own crossmember. I need to find the complete kit to capture the ball on...
I am building an AV8 with my son. '48 flathead, '39 trans, '40 banjo rear, '40 torque tube that I am going to shorten. I am going to fabricate a...
Working on an AV8. Model A frame, 1930 body, 1947 flathead engine going in, Brookville grill shell, planning to order a walker aluminum radiator,...
I am building an AV8, loosely following the Tardel book. I have a rebuild '47 flathead, crab distributor, etc. I planned on running a 46-48 type...
Questions for those that have done this. Pic below. I cut the hangars from a model A rear and am going to put them on the '40 rear What spring...
Set of ford model a wheels and tires. I was going to use these on a project but they are not going to work the way I thought they would with later...
Recently bought this for the body. Selling the chassis. 1930 Model A. Engine runs and sounds good, I have a brief video of it running that I...
Bought a '40 "ish" ford rear to use in my 12 year old's AV8 project. It is completely apart now and a mix of parts. One hub mounts on the...
Sounds like he got out with his car and only a few possessions. Chuck Overmyer and his wife, Ninabill, said they lost their, 1,800-square-foot...
I figure it's time to start a thread on this one... I do have to get more pics though. My middle son is 12 years old, he loves to work on...
All, I have the carb below on my T. It was new 2 years ago and has been fine. Tank is stock location (cowl), and I don't run a fuel pump. Stock...
All, I have a '39 toploader for my AV8. Going the F1 crossmember route. I have the crossmember and a new saddle from MAC's. The saddle holes...
Any way to tell visually if a set of heads can go again without extensive/expensive machine work? Aside from cracks and things like that? I assume...
Anyone know where the VIN is at? I need a police inspection to get a title. There is a plate on the cab pillar on the drivers side, but it's...
My uncle is about 60 and has a 32 Plymouth 4 door. It has been in the family for about 60 years. My grandparents owned it and he bought it from...
I bought a 1940 Ford rear, doing the Tardel Bishop AV8 ride, building it with my 11 year old son. I have a late 40's flathead and 39...
All, I am building an AV8, along the lines of the Tardell/Bishop book. I have a '40 rear, it was sitting for awhile, but appears to be in...
I am building an AV8 with my 11 year old. Basically following the Tardel/Bishop book. I have a late 40's flathead that is stuck, it has the...
Separate names with a comma.
The Jalopy Journal
