The Jalopy Journal
many thanks
Thanks from what I found in the internet it is a lager version of the 97 Will a 97 overhaul kit fit to this carb?
I have here a Stromberg carb and not sure witch modell it is. Look like a 97 but the number on confuse me[ATTACH] [ATTACH]
That was I check first and then logical step by step but on the end it was the box. I change for another and it runs fine again
The MSD Service sound great but the sipping is ca. $100 one way!!!!!! As Ford amplifier ore Mopar ignition box is may be a good idee such is cheap...
After 15 yeas in rhe shelf I get the dust off an 6AL ignition box and use it for a Flathead with a modified Chevy MSD distributor. It runs fine...
Yes the bellow is the problem all other parts are no problem It is sad that there are no parts because it is a nice piece. I got two Autopflux...
Hello, I have a niche old AC fuel pump and looking for a repair kit. The pump is in good condition, the valves are clean the electric look good...
The car is on display in the Mercedes museum. It was amazing huge car I was surprised about hat large size
[ATTACH] [ATTACH]
I have an 16 spark cap from a Scintilla distributor and thinking to build a dual spark flathead. So I want to convert a Mallory dual pint...
Yes twin magnetos It was much work to get them syncronised The limiting plates must be changed, but not easy to get the right advance first time...
Ford Buckel Taunis 1947
@Tow Truck Tom sorry for that but I think you understand my worst English better than my good german :) @chrisp Leboncoin is a good source, but...
@Harv thank for good explain. In english I often miss the right words to describe how it works- But in the Stromberg are only 3 systems idle...
Thanks Harv I add a PCV under the maifold. May be this can have such effect?
your right but I have the same problem with the real ones
I have Falthead in my dyno. Motor is mostly stock with cam from a frensh 3.9 Edelbrock heads and Edelbrock twin carb intake. Ignition is Magneto...
Nothing here made sens at the end, we do it because we can With that low output coils there is no chance for crossfire. When I found parts I will...
WOW yes it looks that the Bugatti 49 one this distributor come from :D Not sure should I am happy ore not because that made spare parts very...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] 20 is max I can count, so 18 is a real challenge may be some can check that I am right with...
again 16 holes for spark plug two holes for coil eight lobs on the point cam @Moriarity I will do sorry
On the left is the complete, on the right the housing with shaft. The one on left look typically for French distributor drive[ATTACH]
thanks for enlarging the pictures. there are 16 spark wires 9 in lower 7 in upper row and eight lobs that move the points, so I am sure they were...
I runn in a dual spark Scintilla distrbutor and thinking to use it on a Flathead Ford. There is absolut no info in net where ist this distibutor...
Great story
Grat thanks for the info I send a PN
Thanks the guys in UK ? https://www.stromberg-97.com/
I get a Stromberg 24.6 I think that is .97"in metric. It have a few different details, the throttle blade part is aluminum but otherwise it look...
Hello welcome. Do you share the pictures here?
Separate names with a comma.
The Jalopy Journal
