The Jalopy Journal
I didnt say that. If the state only allowed these vintage plates on the year range of vehicle they were originally issued to, then I'd get behind...
I can't get behind this the way it is implemented. They allow these so called vintage plates to be used on any year vehicle. It just devalues the...
My Ol' Furd gets plain ol' 87 regular. Here in Central California, it has around 10% ethanol. My entire fuel system is built around that....
With the acrylic enamel, you could add your clear into the last cup of white, and spray 'em together. Essentially white tinted clear as the final...
On a Mac, control click gets you the windows style "right Click" menu
I'm currently working on a piece for a friend. It's a '67 Camaro. Is that forbidden? I thought I'd post a step by step, from the beginning,...
Here's a pencil drawing I did of my Ol' Furd. Haven't done one like that in many years. Since about 1995, id been using Adobe Illustrator to do my...
BB, you've set the bar very high for what can be achieved by the home builder. Or the professional shop builder for that matter! You have shown...
I used Summit's single stage urethane on my Ol Furd f100. Wimbledon white, along with a maroon called "Merlot" on the roof and wheels. I'm...
There was an episode of Vice Grip garage that featured a 318, with a 360 stroke crank and they adapted LS Shiverlay rockers. I don't know if the...
I've never had any luck R&Ring the yoke on a 9" or 12 bolt, or anything else that uses a crush sleeve, without having to replace that sleeve....
Thanks pprather. I did not know the link doesn't come thru when viewing on a phone. The rod I used is 3/8" steel straight from the tractor...
Right below in red. Where it says Ol' Furd.....
In my case, I've had the single purpose "Hot Rod" (actually a dedicated drag car) that spent its life in the garage, and only being brought out to...
I should have pointed you to post #50 on my build post. (Use the link below). Has a photo of the rod rod end on the linkage rod. 3/8" rod ends....
The F100 clutch rod is easily replaceable with a rod and a couple heim joints. Not only can it be adjustable, it can smooth the actuation.
I'm with rest of you cheap bastards. I did my own paint. Used off the shelf single stage paint colors from Summit. I have about 600 bucks in...
We raced the March Meet many years. I'd say the split between good weather and rain to be nearly 50/50, and I've spent many weekends sitting and...
That was a very valuable resource for those wishing to learn about MFI. I was gonna point my son to it after I handed my drag racer over to him....
Nope. And I've paid the price. And it was as simple as trying to avoid a coyote. The result is I've got three titanium screws in my right ankle,...
[ATTACH] [ATTACH] I got universal retractable shoulder harness belts from Seatbelts Plus. I was able to fish a steel backing plate with a nut...
Yep. Diggin' the new shoes!
Opinions vary. (Movie credit: Roadhouse) My opinion....less is more on this truck. Because it is already bad, bad, BAD to the bone. Some accent...
TurboSmart is good stuff. Marty Staggs there is one of my racin' buddies. He set me up with a lot of the turbo stuff for my VW. He didn't steer me...
What could go wrong iindeed! Methanol is a cold fuel too. But let 'er go lean, and DAYUM SON! Don't skimp on the waste gate. That's your primary...
Not nearly as critical with boost as without. The main downside to restrictions on the charge side is heat. I've never seen a boosted propane...
Looks like you're on the way with that intake Will. A guy over on FordSix was doing one, and as I recall, it had some body interference at the...
All of these small details is what sets this far and above the typical. But a phrase from post number 2320 literally made me chuckle.... "Before...
Can you mount it to the distributor body like the one in the picture? [ATTACH]
You just have to do a search. The off brand stuff is very apparent. I've even bought raw material, such as a 2" x 72" chunk of 6061 aluminum bar...
Separate names with a comma.