The Jalopy Journal
For sale is a pair of polished 18" Radir spindle mount 12 spoke wheels with 18x3 tires, tubes , wheel bearings and all the hardware needed to...
Sent from my iPhone using The H.A.M.B. mobile app
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Trying to get some extra money in the chrome fund so I've had these sitting around a while and don't...
Alright I figured I'd try n keep this up to date on the metal work. I picked up 2 rocker patch panels, I'm going to use both on the drivers side....
Slam it, paint those skirts to match and find some hub caps for the front. Put some nice sounding mufflers on it or just take off the stock...
Ok, the original question is do I get a new oil pump or just stick my old one back in. I say you'd be better off with a new one. The big dick...
Falcongeorge- The guy was asking if he should just stick his old pump in or buy a new one. Would you just stick a set of used Pistons in your...
Okay, rebuild it if you have the means. I was just implying not to just stick a used one in... Sent from my iPhone using The H.A.M.B. mobile app
Flathead, sbc, hemi whatever the engine is, you have LOTS of hard earned money and time tied up in it. I've never heard of anybody not replacing...
I used a $155.00 brand new melling oil pump from speedway on my rebuilt flathead and never thought about it ever again. It's cheap insurance for...
Well I got most the metal work done, just finishing up the driver side then onto the last of the epoxy primer and mud work. Got all the rear trim...
Any updates? Sent from my LGLS991 using H.A.M.B. mobile app
Tevintage thats a beautiful rag top! Thanks for sharing Sent from my LGLS991 using H.A.M.B. mobile app
[ATTACH] Finally gettin some fresh paint on er. Its only the bottom of the hood but its somethin!
I rebuilt an 8ba .060 over with stock cam, 3 speed and stock rear end in a 52 ford customline and was quite surprised when i did the math. I was...
What about a pearl white roof and ditch the tinted windows...?
Any word on the wires?
Alright well the front suspensions done. I'm gonna take a break from the mechanicals and decided to give er a face lift with some new single stage...
Well I got most the front suspension rebuilt. I cut 1 coil off the new springs so well see where it all sits when its back on the ground. Ps pumps...
Id stay away from the supremes n bell flowers unless you want it to be like EVERY other late 50s/ early 60s "custom".
What color are you thinkin of flaking it? Itd look good with a flaked roof and some chrome reverse wheels with wide whites. I was gonna do that to...
Okay starting with the steering and front suspension. Hopefully by spring ill have the basic mechanicals on this car disassembled, degreased,...
Got the dash lights working, burned out rheostat in headlight switch. Easy fix...
Figured out the windows! Two fried motors, 3 fried switches. I had to see it with the windows down though...
A couple more...
Thanks guys. I'm gonna freshen up the mechanicals, lower it a little and find some wheels n tires i like. Anyone know if the aerostar spring works...
I gotta bump this one back up, Great work!
Separate names with a comma.