The Jalopy Journal
There have been threads on it here and on the Fordbarn. For every one negative review, there are 3 who chime in with positive reviews and...
I’ve seen advice to never loosen to get the cotter pin lined up. Tighten, or take the nut off, and sand the back of it a bit to get it lined up
I just got my threads to come back by taking a good original castle axle nut (original, not any of the new ones as there is a big difference with...
They are just over an hour from me. We got 8” of snow two weeks ago and then a hard freeze for several days. Where they are, out in the country,...
As for function, if the pipe is close to the water neck on the head on pre-49 heads, it would help keep the thermostat from traveling up.
Can you post a picture? It either sounds like the cluster was replaced at some point in the last 83 years, which is very possible, or it’s perhaps...
You can always call Pertronix if you aren’t clear on something. They have great customer service.
1940 was the last year for the V8-60, their economy engine and only other engine option. In 41 they introduced the 4 cyl tractor engine as the...
Fine line for sure. But if you weren’t “restoring” at least some of the original parts or design, you’d be building your own new car from raw...
Wow, I’m glad my picture has been of so much use. Don’t they all? Lol. My guess as to the hood changes is they ran out of the 1940 or V8 only...
The hood and latch you have was fitted to 1941 6-cylinder pickups and late production 1941 V8 pickups. The 40/41 book on the early v8 club of...
The trim is what makes it a 41. The waterfall ornament also looks weird in my opinion without the whisker trim. Your truck looks very nice! That...
1. Wash the car 2. Hand rub in Meguiars Number 7 and let soak 3. Hand wipe off 4. Wax I just did this to 40 year old paint and it looks amazing....
You’re on the right track with taking the intake off and looking at the valves. Move the engine over and look closely as the valves open. This...
Mine were way off. So I just bought new brackets from Bob Drake. They fit like a glove.
100 degrees isn't too cold for water temp? Your cooling system is definitely in good shape! I'm curious how you know its only 100, and if that's...
I hear ya Lynn. No harm in trying. Good thing you’re in tune to red flags though.
I just did a quick search and found that pickup on a sketchy website. I’m sure you already know this, but do not send any money until you put your...
Flatheads overheat.
I’m sorry, I wasn’t listening.
That starter solenoid as pictured looks old and crusty. If that’s the replacement, I’d get a brand new one.
Sorry to continue the derailing of the thread (no pun intended)… Third gen auto has the fiber and copper kind.
I wouldn’t be concerned about 195. But your engine will run hotter as it’s new and tight.
They’re 1938-41 or 42 221 heads. Id say worth selling. Someone will want them
That is a very interesting MH you have. Sorry I don’t have any answers for you on what was done to it.
The 40 and 41 pickup frames will be the same if it’s a 41 V8 frame. As mentioned, they offered a 4 cylinder and straight 6 in 41. Those frames...
That’s a great question. Looks like a bad attempt to turn an ugly 80s car into retro styling. Some things don’t mix. Sent from my iPhone using...
Thanks for the video Mart. Interesting bits on the 41 regulator. You’re giving me ideas for mine next time I look at it Sent from my iPhone...
Nice! I’d find room in a garage for that too... Sent from my iPhone using H.A.M.B.
I like the app as it seems a bit better formatted for phones. Also pictures come up better displayed I think rather than a bunch of thumbnails...
Separate names with a comma.
The Jalopy Journal
