The Jalopy Journal
I do the same on mine, just switch from counter shaft to direct motor pulley. spring loaded idlers take up belt difference.
You can get metal bi-metal blades any length. 93" blade is around $20. Good blade supplier welds them size. Bi-metal 12-14 pitch.
I don't know if this was posted before, here goes: Convert bandsaw for metal. You need to slow the rpm down to around 200 rpm, and use Bi-metal...
Is this Galup New Mexico?
What happened, no more updates?
The pilot adapter could be the problem. The original Hemi flywheel had a recess in the crank end. The adapter flywheels have a flat mounting face....
How to view photos in old tech articles?
I don't think so. Can you verify?
You need most of the Body, steering, seat etc. mocked up. The center of the pedal pad should be around 7" from the floor. Make sure your M/C...
Frame number was the original engine and transmission number. I believe the frame was stamped after the tested engine was installed. Model B...
Get the original style bushings honed at an engine shop that does wrist pins. Will last longer than reaming them.
Happy your posting again. Fabulous work!
Installed a battery clock movement($15) in altimeter gauge in my 32.
I second on the HYD. TO bearing. Remote easier to replace on the road.
Real easy to make with a welting foot.
That will be hard to duplicate, LOL.
I believe you have to weld the A crossmember into chassis with 7deg. caster. Welding in the 7 deg should eliminate any bind if the axles is same...
If you pair the correct size M/C, you wont need power brake booster. I used and made under dash M/C. Translucent fluid reservoirs can be viewed by...
Lined my drums inside with 80 grit stick on body shop sand paper. Back lawn tractor back tire up against front tire. Jack up car, have friend pry...
Get your new king pins honed instead of reamed. They last longer that way!
I also have a blown Hemi in my 32 with Vega steering. Easy to drive and no problems. CE forged dropped I beam front axle.
I'm sure many wood prototypes were destroyed. No further need for them. Beautiful pieces!
All old cars leaked oil, and nobody thought about it. Today, so spoiled by new non leaking newer cars! I remember pans under some of my Dad's cars.
My original 32, blown Hemi, 5spd. QC, B[ATTACH] [ATTACH] [ATTACH] uick brakes
When we raced Formula cars, we would build a box around car with fishing line the height of wheel center. Then measure to wheel rims. Car must be...
bump
Bump
Separate names with a comma.