The Jalopy Journal
Thank you for saving her the right way. You do very good work it will pay off in the long run.
Very nice. Enjoy.
Make sure your base to body screws are tight. I had similar issues with a 4GC on a flathead. I found that the screws had loosened and the fuel...
Thank you for posting these great pictures. I was there in 2019 and hope to return some year.
I have a 1957 F100 that came from the factory with electric wipers. Not sure if it wold fit a car.
Best of luck. I love the Mag and have every issue. I can't wait for the next one.
Just used grease about a month ago. I didn't have any round stock the right size to drive the grease in so I used the plastic alignment tool and...
Here in New York it is about a 90 day wait for an appointment. You can only go to a DMV office in your county. It was always faster to go to a...
[ATTACH] My 32 dash done in stainless with a 1/2" Cratex stick in the drill press with a yard stick as a guide and 1/4" overlap.
The Gerstner company has a web site and they will look up the time the box was made for a fee. They also make keys for your lock. Take out the...
Very interesting I never knew any of that. Well done.
Thank you for this post. The pictures are excellent.
You can find the info you are looking for online in the LMC truck catalog their address is LMCTRUCK.com Just select the online catalog for the 59...
My AFCO in my 32 started leaking in the same area where the bottom tubes attach. I used JB Weld also. I bought the large size and thinned it with...
I saw it at Syracuse, very very nice.
Thanks for posting that video. I was also there that year. I was happy the days I went it wasn't scorching hot.
Eric I saw your car at the show and talked with you. The car turned out beautiful. I had been following your build thread but didn't see the later...
This is my 50.[ATTACH]
I love it, slick looking bike.
Here is my 50. [ATTACH]
My 32 8BA with a T-10.[ATTACH]
J.A.W. send me a pm I have a couple of those bell housings with the starter plates. I would like to see your project.
I have a T-10 on my 8BA and it's from a Mustang. As drtrcrV-8 stated they had both bolt patterns. I hope you have the starter mounting plate for...
It pulls out. If you look on the back of the switch you will see a small lever that actuates the cable.
I have been in love with the Bo Jones car from the time the magazine came out. I scanned the article and have the pictures in the garage. I have...
It's Krylon metallic finish #2908 Copper. Just put a few coats on wet sand and rub out.
The outside is black, the interior paint is just Krylon spray can rubbed out. I would have to go out in the garage to get the color name.
[ATTACH] My 32 5 window. I found a hacked up dash and filled it in. I made the stainless panel and did the engine turning on my drill press. The...
I have seen a 50 dash in 51 so I would guess it would go the other way easily.
Here s mine. [ATTACH]
Separate names with a comma.