The Jalopy Journal
Do they still have the James Dean Run in Fairmont yet?
Thanks Merc Man
My 50 Merc
Thinking of selling our 50[ATTACH]
Yes, I also have AC
Going with the standard 5/8" shaft, do these measurements sound right " 7.3" crank with 6.75 ps add on. And 6 3/8" water pump pulleys. On a 8"...
Denny thanks for the info, I have to get a 2 groove crank pulley plus one for ps
8 inch
Not to many used parts places left in my neck of the woods, the state closed alot of them down. So, looking for new parts but have found 3-4...
Thanks, that's where I got my mounts for my long water pump.
I need to switch from a long water pump to a short water pump on my SBC. I need to switch my pulleys and I see different sizes available, was...
1950 Mercury[ATTACH]
I to had exactly the same problem as you. I come to the conclusion that a mechanical fan was not the answer without a shroud. I only have 2 3/4"...
Well, did a amp test as stated to do, and at idle with everything on I still have a 13.2 reading. Thanks for all the posts, and when I have to...
All new wiring and fuse panel put in with build. Kwik Wire
I recently added a new electric fan and now wonder if my alternator is large enough. I have a 100 amp alternator, here is a list of components:...
I recieved the electric fan that I ordered, it came with mounting zip ties with directions to mount directly to radiator. My question is, would...
Just one of the cars that I own
Was wondering if I run a Mechanical fan below the radiator about 1 1/2" matters? And are there any consequences to doing so?
I feel your pain, we did my 50 Merc about 5 years ago. Took 7 years to complete, so I know what your going through. But it was worth it.[ATTACH]
[ATTACH]
It's a 2 row 1 1/4" tubes, it's not attached to the radiator. Its mounted with mounting tabs, but it's still flush with face of the radiator. I...
What brand would you recommend? Been calling Spal with no reply
I've got 2 3/4" of clearance between the face of the radiator to the fan pulley. Haven't found a fan setup that will fit in that space and clear...
It's a 1950 Mercury with a 350 SBC, there is no room for a shroud unless I run it around the fan. But the fan would still be mounted to the...
Everything is new ( water pump stock, thermastat 180 Steward fail safe, Zirgo 16" 3000 cm, 2 core aluminium radiator), runs from 180 to 220 at a...
I am wondering if a pusher fan is my answer. Here's my question, I currently have a 16" 3000cfm puller fan in my car now, it runs 180-190 on...
Separate names with a comma.