The Jalopy Journal
Intake with ports unmolested is sold. I still have the two carbs and the intake with the open plenum. $200 for the intake, $50 each for the...
TTT Price drop to $500 for the pair. I can flat rate carbs for $25, intakes will be around $40 priority. Nicer intake(with ports) SPF. Thanks
Beautiful job! I grew up watching my Dad do many projects like that. He was a pattern maker, almost a lost art these days. People would bring him...
Two Offenhauser 4bbl intakes for 49-53 flatheads, one has plenum opened up. One carter WCFB and one Rochester 4GC Carburetor. Carbs are just as I...
I used off the shelf stats with the jiggle pin. Napa on 379-180. No need for extra holes. I don’t care for wires, or extra clamps. Get a piece of...
I just did this, make sure you pre-assemble it and mark the spot for the groove, if it’s too far back from the front you won’t be able to get the...
Sold! Thanks H.A.M.B. ! Sent from my iPhone using The H.A.M.B. mobile app
These are aluminum Mercury knock off caps made by a fellow hamber fourspd2quad. They have 1932 to 35 style hubcaps attached to the rear of them so...
Sears, all state combination fuel pump and wiper vacuum motor, part number 282698. Not sure what it fits but it kind a looks like the one on my...
Old military far wall mounted oil filter canister style. In good condition. Comes with new NAPA filter and gasket. Will ship priority mail to the...
Flathead valve guide puller in very good condition. Will save lots of time removing valves from a flathead. Price includes USPS Priority mail to...
[IMG][IMG][IMG] 32 Pinched for 1931 model A, Forty rear crossmember, model a front. Putting the lower front shock mounts on the upper end of the...
Price includes shipping priority mail to lower 48. These are used were on my car for about a year, but in very good condition. SOLD!
Usually it’s a letter-number-letter date code. All do not have it, But if it’s correct it would be February 10, 1953. But it doesn’t match the...
“Some Poo Welds”? I don’t think I saw one good one. I’m no welder and blind in one eye and I can weld better than that![emoji38] If you need...
Bobbed 32 frame. [IMG] Sent from my iPhone using The H.A.M.B. mobile app
That looks like the engine out of a “Brick”Lin SV-1! Just watch pulling too many leafs out of the springs. After my first test ride I had to put...
Here’s another one that I found. [IMG] Found on my property when the snow started melting. :) Storing it for a friend. Sent from my iPhone...
Love it! I’d rather watch one drag race than a whole day of Nascar. Always been my favorite racing since the days of Don Garlits, Don Pruhdomme,...
Here’s my Christmas card for this year![IMG] Sent from my iPhone using The H.A.M.B. mobile app
One of my past winter projects that now has a new home. [IMG] Sent from my iPhone using The H.A.M.B. mobile app
I built my own jig for a 32 frame, which turned out to be an AV8 frame, but made the crossbars not only removable, but they can also be flipped...
Homemade mount, model A? Lever, aftermarket cable kit. [IMG][IMG] Sent from my iPhone using The H.A.M.B. mobile app
I don’t see an issue, Edelbrock with three chandler groves, offset( to right) gen bracket. Fan bolts in stock location. [IMG] Oh, and just ignore...
Yes definitely anchored to the frame table and only pull one side at a time. Take lots of measurements before and after. No I did not have to do...
I pinched my 32 frame to fit a 31 coupe body. Used chain tensioner, welded on a tab inside the frame and yes had to use heat. All this was done...
Drilled by a friend of mine. I like the extra holes, less wind resistance![IMG] Sent from my iPhone using The H.A.M.B. mobile app
You can keep the torque tube. Sent from my iPhone using The H.A.M.B. mobile app There is a good arctile on the Ford Barn about it, but I could...
That car is better than Darryl Starbirds Superfleck Moonbird! Definitely the car that changed the life direction of this 14 year old! Oh, and dish...
I ground a socket very thin on the end. Worked ok for me. Sent from my iPhone using The H.A.M.B. mobile app
Separate names with a comma.