The Jalopy Journal
These are the real stromberg's. I got them from a guy on this forum who is the distributor for them. I learned the lesson on the china air...
I've been struggling with similar problems on a 331 Hemi with 4 97's on it. I struggled with leaking needle and seats and have solved that issue,...
Thanks everyone. Looks like I have a 37 or 38 Lincoln rear. Now to find a spare.
[ATTACH] [ATTACH] Same car 60 years later
[ATTACH] [ATTACH] [ATTACH] I have a 34 ford that I have rebuilt and got back on the road. During this process, this forum has been very helpful...
Thank you!
My dad and his 34 in 1955. Me with the same car today
The other problem is that the rear end is not centered under that car. I’ve been doing some measuring today and I think the hole in the channel...
Looks like one wheel is further ahead than the other. I’m thinking the broken spring is causing the rear end to twist as well as lean.
Thank you for your help on this. I'm located in Lander Wyoming. I'll update my info. I'll be removing the spring today to get some better...
There is a plate welded in the crossmember that prevents the spring from going up into the channel of the crossmember. Not sure what has been...
[ATTACH] [ATTACH] [ATTACH] I have this old hot rod I’m working on and having problems with the way the rear end aligns with the body. I have one...
Thank You Stogy. It sounds really good. Planning on going to as many local car shows as possible this summer. Zoom into the older picture. I...
Two and a half years after I started this it rolled out of the shop under its own power. First time in 60 years. Still a few things to tighten...
The tach in the video on his website is mine. He built the hardware and software to make it compatible with a modern distributor without using the...
Mark at Accutach Company can make your old 760 work. They are looking for a beta tester, go to accutach.com for details. Great guy to work with...
I am wondering if some of my problem is that I need some sort of check valve in the system. It seen like I need to do one or two strokes on the...
Is it similar to the pictures I just posted?
Here’s a picture of what I have
I am using a early ford three speed with a extended bellhousing 331. What is commonly used for a slave cylinder for the clutch? I have a plate...
the software makes it adjustable to any 760 gauge being used on any 4,6,8 and 12 cylinder engine
I have a Stewart Warner 760 series tachometer that uses the puck that goes between the distributor cap and the distributor to drive it. I...
Original frame in fair shape. Some rust in lower corner. Needs screws drilled out. $300 plus shipping
You guys have convinced me. I spent today building a mount for a spoon type pedal. Will use a .250 rod through the firewall to the carbs. I...
I checked today on shipping costs for this. It looks like it would be around $300. I am located in Wyoming I don't know if there's anyone close...
Sadly he passed away about six months after I found the car but before I was able to make a deal with the owner. He was getting some dementia...
Thanks everyone. I'll see what I can do.
Coming along. I can’t believe how much I have learned doing this. At least the end is in sight.
This is the seat that was in my 34. It was probably last recovered sometime in the 50s. It’s in pretty bad shape and I’m not going to use it in my...
What I worry about the rod is having it get pinched up against the firewall when the engine torques over. Is this even a concern?
Separate names with a comma.
The Jalopy Journal
