The Jalopy Journal
we cleaned out a vintage breather and there was very little material that looked like steel wool. what is the correct material to repack a breather?
what fuel pressure regulator is used to keep the fuel pressure at 1 1/2 to 2 psi? i have used the dial type and it didn't do anything. if i turned...
Studebaker engine parts as follows: All parts clean and usable, no cracks or outward damage. All can be shipped for cost of shipping. 1956...
This is a 1951 Chevy Bel Air 2 door hardtop with clear Idaho title. There are no extra parts for the car. Here is a YouTube link for more views of...
This is was labeled 1956 Chevy blower motor, but could fit other years and models, make sure this works for your project before buying. Includes...
This looks to be a 1959 Cadillac Fleetwood air cleaner housing with snorkel and lid, per search of like items online, please research your...
This looks to be an OEM toe board upper floor pan for 1941-1946 Chevy trucks, please research your application before buying. Measures 34" x 11"...
This looks to be an OEM dash board for a 1926 1927 Oldsmobile, we compared to similar and some "experts" agreed with the ID, but please research...
Where can I find a throttle ball connector for a Holley 94? I haven't been able to find one on the internet, maybe you experts have a better idea!...
can you use a 216 cylinder head 3835517 on a 1938 216 block?
we just bought a holley stromberg 94. it says 8ba on the carb and 94. what rebuild kit do you prefer? any tips or tricks to make sure of a good...
have any hambers used the trans adapt 2041 to put a holley 2 bbl on a chevy 250? what was your experience?
we need help finding a speedometer cable for this speedometer. the threads are on the inside. an adapter to use a modern speedometer cable would...
has anyone use single layer safety glass as a windshield? what has been your experience with a rock chip? normal windshields are two layers of...
we thought it would be neat to see the view from your shops and garages round the world. [ATTACH]
we are building a chevy 2 gasser and were wondering about the firewall flex from the upper support tubes. should there be plates behind the...
we are looking for the bushings or grommets to connect the wiper linkage to the vacuum motor. what have you used if they aren't available?
what have you used to repair a cracked plastic clear parking lens?
what engine mount brackets are you using to put a 250 six in a 1951 bel air?
Thought you would enjoy the enormity of this valve, a mere 16-1/2" long and 8 pounds. I'm guessing a very large engine.... [ATTACH]
what do you use when replacement curved glass isn't available? poly carbonate scratches just by looking at it. aircraft use plexiglass but has...
have you found an electric wiper from a car that would work on a split windshield? we were thinking a rear wiper from a suv. the short sweep makes...
we just bought a studebaker v8 with the engine number vl 9338. we can't seem to find the exact number. any help would be appreciated. maybe its a 259.
We finally changed out the rear leaf springs to 2 1/2 wide springs. It took sometime to put the right combination together.We made the leaf spring...
we have been looking for the lower knuckle bushing for a 1949 plymouth deluxe. if we could find a part number to cross over to another make or...
I got this in a box o' parts, looks like some kind of cable lever, any ideas on an application[ATTACH] [ATTACH] . Thanks.
The 1949 plymouth p17 fastback is getting modern leaf springs. When we were mounting the front spring hangers we found where some of the old seats...
we tried the citric acid solution on some parts after reading hambers success. it works very well. we put a very rusty crankshaft and some 8ba...
Got this in a lot of parts, but couldn't find anything like it online, any ideas, thanks.[ATTACH] [ATTACH]
we are looking for a starter drive gear. the teeth on ours has too much wear. does anyone have a gear they would like to sell or know of a new one...
Separate names with a comma.
The Jalopy Journal
