The Jalopy Journal
Trailer looks great. “ too strong never failed”
Mount looks nice. Bolts in and out.
I have the same 33 chevy
Thank you for all of your efforts to bring us these great photos. The cars all look so authentic, it is a pleasure to see them look so good....
Thank you for your “live” coverage. I will be following. Mike.
Great thank you for your efforts. As a note to others interested in seeing more they can search you tube for PENDINE 2022 and get more content...
I made a proto type from one piece of .060 aluminum sheet
Cool British hot rods!
May 14 and 15 2022 are the dates for this years races. Usually have a great bunch of cool cars.
Drill another hole in the cap so that the pressure can’t increase. I have used this method. If more pressure is needed then put a piece of tape...
I built a parts washer with a barrel. I put a thick plastic bag in it. I added about 8 inches of water at the bottom. The dirt falls in the water...
Mig weld bead is too hard for sheetmetal welding. The sheetmetal has about 50 to 60 thousand psi yield strength. Mig wire welds are in the 70...
Wow you are still going! Congratulations
HDPE is too soft to smash steel so it can’t stretch by smashing. I use it to smooth lumps using a dolly on the opposite side. As another little...
You are welcome. If you want more info just ask. Mike
Ok here is how to attach HDPE or other plastic to steel. I have only worked with HDPE cutting board 1/2” thick. I have some carpet tack strip...
Great idea!
[ATTACH] [ATTACH] [ATTACH] I just finished making a slapper and a hammer using a $15 cutting board.
That is a well thought out bandsaw. Very nice job
Thank you. I have since added a table and an adjustable lamp.
I modified my HF bead roller into this
If you are really really careful and you use plenty of personal protection you can use sodium hydroxide to remove paint and grease. This is drain...
Sodium hydroxide is the strongest base there is. Oven cleaner and drain cleaner are made of it. Try spraying oven cleaner on your spots wait a...
When I was just starting out messing with motors in the 1960’s I had a wheelbarrow and I would fill it with water and add a few cans of sodium...
Regarding T SECTIONS. I have drilled holes in the horizontal piece above the edge of the vertical piece then plug welded. This keeps shrinkage to...
Thanks, David. Am sure it will be inspiring
Are we going to see a video of the build? For sale of course. Mike
[ATTACH] Here is my shop truck working
And a flat tire.
[ATTACH] [ATTACH] [ATTACH] Here are a couple from outside [ATTACH]
Separate names with a comma.