The Jalopy Journal
Blown Flathead $ 10,000 firm. Only hours are on the dyno all new. 4.125 stroke x 3.248 bore best of everything Scat Ross Isky 400 ported...
32 Blackboard pinched Model A frame , Speedway Engineering quick change ,4.11 Ring and pinion 3.89, 4.42 helical gears. Pete and Jake springs and...
I never liked cable speedometers when that was all there was. Having to change gears and add reduction boxes Bouncing needles. I use electric...
Sold
I have a Speedway Engineering QC with bell axle tubes in a model A with a Rover/Buick engine. I love mine. Has the helical cut gears so it's semi...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] New Wilson Welding Finned aluminum brakes. 500 bucks plus actual shipping. SOLD
Dart and Blueprint both sell new blocks if you just have to have one. He beat me to it^^^^
Mine were oversized. Couldn't find any replacements. So Gary McGlasson made some. Worked out fine.
Is it still gonna happen? Or get shutdown by Caronavirus scare? Austin won't allow anything over 2500 people.
After I took the garnish off my pushed out really easy they had the original canvas rubber looking seal and it was all dried out. If yours are...
I was worried about burning the wood where the top tacks down but I think the insert may be outside of that. And I can put it in afterwards that's...
I watched the #20 of the 32 chop and it shows the basics of doing one on the 32 but I would still like to know if someone put the wood back in...
Thanks Wahoo.
Nobody can help on this?
I will soon be welding in the Walden Insert on a 30 Model A coupe. I found a thread on here where a guy called Grits said you can weld the insert...
What Gimpy said X 3.
If I am thinking right once it's in the hole the d shape will keep it from turning. So I may drill 2 holes beside it and tack weld it on then...
I tried to call a couple of places to see if their d nuts fit the door but they were all closed. Now that I know what they are called I hope to...
I have a 30 Coupe I was going to replace the door latches as they were shot. After soaking for a few days and some heat. Every single one twisted...
He was set up in the swap meet area at the 2019 LSR.
https://www.jalopyjournal.com/forum/threads/new-stromberg-big-97-issues.1015931/#post-11481591 Found it. Sounds like in his opinion you can run it...
Alchemy there is a thread on the Hamb on a return line to relieve pressure on the Strombergs after shutting off the key to prevent gas running...
60's look for me, never any whitewalls. It's what I grew up with.
Rover/Buick and a Flattie[ATTACH][ATTACH] Sent from my SM-N960U using The H.A.M.B. mobile app
Havlirs house of fab.
They all interchange but you need top off the S10 that has the shorter shift rods too. There are the speedometer gear differences but there are...
All it's supposed to do is take the ridge out. If it is flush it would cut where the rings seat. And by nature of it's design it probably will put...
I was at the Canton Texas swampmeet today. I saw an OMC tach that appeared to be somewhat old. I liked the face and it was a 6000 RPM tach. Upon...
Could have been milled off if it was decked. But I have had SBC's that didn't ever have numbers.Look at the site below....
http://minimopar.knizefamily.net/oilfilters/index.html
Separate names with a comma.