The Jalopy Journal
Mine worked on the first test runs 2 years ago, but it won't self bleed now...no flow. Here are pics of where the hoses are now on the engine:...
BLC 682 J. These are the deep bucket type, used in 40s and early 50s on rods. Takes standard 6v or 12v sealed beam. Sold to Cal. These were...
Sold, Pending payment to N.J. These are the shallow bucket style popular in the mid-later 1950s , early 60s. $85 pair, does not include...
EDIT, This is SOLD Old add-on signal. 10" wide and 3" tall. Chrome is worn in places showing the brass base metal, and chrome also has light...
EDIT>>>SOLD ... 12-2-18...53-56 F100 hubs from old rod that were drilled to a second bolt pattern of 5". ...or use the original 5.5" pattern. I...
My avatar 32 uses an original 32 4 cyl radiator for the early Olds Rocket. It is now leaking too much to keep it going without constantly adding...
Note, 5.5 inch pattern, but these must have been on an old rod as they were also drilled for a 5 inch pattern to perhaps match an Olds/Pontiac...
Sale pending. I will redo the ad if not sold. ..
ALL SOLD...Twin matching "Chrysler" 8 cylinder tachometer instrument clusters. Best guess on age is around 1960s due to the Chrysler pentagram...
edit...SOLD & gone, to Mass..All of these pics were taken by me today, in Eastford, CT. (northeastern CT, close to the Mass border) Typical...
A long time friend turns 60 next month, finally bought his life long dream build, the exact model and year...after I took him out for a few hours...
EDIT>> This dash has been sold to Whittier Ca"...Thanks Priced at $200 (it is now SOLD) plus shipping, with the clock glovebox door. Measures...
edit: SOLD, ...to Ohio. LaSalle grille in decent original condition. Has minor pitting and a small chip on the underside that I have marked with...
Everything here in the entire Ad is Sold and Gone---Two J2 intakes with original genuine tri-power carbs. One is 57 with original vac secondaries,...
ALL SOLD... GONE34 Buick model 40 straight 8. Came from the estate of a streetrodder and he eventually hot-rodded the car this was going to be...
sold
This is an odd one. There is that section that fits between the cap and the distributor. O.D. of the distributor is 3.25". 6 volt on back...
I never ever imagined I'd ever have something to be able to be on the Traditional Custom board...so let me start with some pics. I have worked...
Many people around the world either have never been there, or have not been in years... Can you spend a few seconds to share views of some of the...
I'm having problems trying to use on of those electronic adapters that lets you use a trailer with only 2 filaments per side, on a car that has...
32 ford with a 40 ford dash, 3 pedals, no room at all for floor dimmer. I do have a correct toggle switch that is used on snowplow lights, and I...
I wish I knew this a couple days ago, in our very humid climate. My tank kept getting worse due to trapped moisture and humidity, after repeating...
I've had a odd illness for over a week; some days could not walk or move my arms. Yesterday I felt good enough to drive to the scrapyard/metal...
I am working on an early 30s oddball car and need tie rod ends. I went to Massachusetts yesterday to a vintage parts warehouse; been in business...
32 nash inline flat 6; -201 cubic inch -seven main bearings -counterweighted crank -aluminum rods with steel caps some of you are pretty crafty,...
Any little book collectors out there that can ID some years and makes of the popular steering wheels around 1957 to 1962, that you have seen in...
SOLD1957 371 motor from an old estate. Never was stuck and was in dry storage. It is a standard shift motor with correct iron flywheel and is a...
SOLDHard to find in any condition,and this one is an early take-off, not pitted. Olds dual exhaust was done with the special rear dump driver...
Firewall mounting bracket for old Fram OIL filter. Very good condition. Decal looks better in person than this pic. Filter can must have been...
Separate names with a comma.
The Jalopy Journal
