The Jalopy Journal
Where did you get your shroud? That might work I think that would help, I see I have several opinion on where to start I have taken them all and...
Hi it is a stamped impeller, the blower is 10 under I am not sure I have room for a shroud . Sent from my iPad using H.A.M.B.
Thanks I am questioning the pulley size. The bottom pulley is smaller than the pump. If it were swapped it would overdrive the pump correct?...
[IMG][IMG][IMG][IMG][IMG] Sent from my iPad using H.A.M.B.
Hi , yes I am reading the temps from the back of the drivers side head. I haven’t checked the calibration of the gauge but it is a new auto meter...
I removed the thermostat and it actually helped which make me think the pump is not moving enough water.was thinking maybe an electric pump...
Thanks , not sure what else I can do on the fan it is all too close for a real fan. Sent from my iPad using H.A.M.B.
I knew I would forget something, I am running a short big block Chevy water pump Sent from my iPad using H.A.M.B.
Hello all, I am looking for advice on solving an overheating problem on my 354 blown hemi. I have a Chinese aluminum radiator in my 32 Ford grill...
We will be there Thursday afternoon amping in the camper with my 31 Ford pu for show. Love bowling green [IMG] Sent from my iPad using H.A.M.B.
I moved mine forward by cutting 2 pieces of 3/16” flat and bolted it to the stock holes on the crossmember then drilled holes for the radiator to...
I was afraid you were going to say that, it is a blown hemi in a 32 frame and the bottom pulley is as low as it can go or hit the crossmember any...
Ok I also had a vibration after my build and have managed to get it to a very slight vibration, but I have the un-good option I. The picture and I...
Sent from my iPad using H.A.M.B.
This is way cool , I went to high school in Maysville in late 70’s I remember all the local hero’s running in Bethany cool place. I live in...
Ok guys that have been lately, give me some advice on where the best place to park . This is my 1st big show with my 31 pickup me and wife are...
I have a 354 blown hemi with a 180 thermostat and temp sender in the back of the drivers side head . It takes about 10 miles to get to 180 if it’s...
[IMG] Hard to see, but I built the door mechanism, and built the door handles out of 7/16 wrenches. $35.00 total works like a charm. Sent from...
I also farmed out my seat , but did all the rest. My first time behind a sewing machine [ATTACH][ATTACH][ATTACH] Sent from my iPad using H.A.M.B.
I’m not sure on the old cragar , I have a hot heads manifold with the front mounted plate. It torques at 25 lbs. call hot heads or don Hampton...
I drove my blown 354 hemi pickup to a car show this fall the 1st time I have really been around a crowd with it. 2guys walk up and said the were...
Yes that is what I thought also, my main concern is where are the vendors going? I love the vendors and swapmeet I am afraid that will suffer...
I saw that gg Nashville and nsra Knoxville are the same weekend this year. That can’t be good for either show. I have been to Nashville many times...
I bought a set from them and received them and was amazed they looked like a piece of jewelry! Mounted some big 31 tall Hoosier tires on back and...
I am 6’2 and 280 I have a 31ford pickup with 3” chop. I built my rod with manual brakes, manual rack and pinion steering. I have to fold up to get...
Thanks, were your angles about the same as mine ? Sent from my iPad using H.A.M.B.
Thanks mike, I mentioned the frame angle to explain why the driveshaft was higher at the rear axle than at the transmission. But I’m unclear what...
Lowe’s has hook and loop carpet area rugs 5x8 I bought 2 for 24.00 each. Cut and layed in looks like car carpet .mine is black, looks great Sent...
Thanks part of the problem is the frame has about 3 degree rake to it and makes the engine lower than the rearend, just not sure how to handle...
Hi all my fiberglass 31 ford pickup is almost complete and have begun to drive it. I have a driveline vibration very fast ,so assuming...
Separate names with a comma.