The Jalopy Journal
Look at the pump impeller. When the vanes of the impeller are turning they should be pushing the water (picture a back handed slap) not scooping....
You will also need either ladder bars, 4 bars or some other way of locating the axle. I used pete and jakes ladder bar....
Although this isn't what you asked for I have been quite happy with my Vintage speed kit. Phil
[ATTACH] [ATTACH] I shamelessly stole this idea from @AVater (thankyou very much sir) and I'm adding his description of the installation. Here's...
Try this https://kustomrama.com/wiki/Arnie_Boyle%27s_Piranha_Competition_Street_Roadster Phil
That's the problem with driving it home we figure at least 6 days on the road(song cue:p), we are not cannonball material. Gas hotels food ext. Phil
We are looking at buying a running driving car in Victoria BC and want to get it back to Ottawa On. Any recommendations for a transport company....
I'm just throwing this out there. I know that's pretty hard copper, I wonder if it can be annealed before you swagg it. Phil
When I bought my coupe it passed the inspection as is so I drove it stock for the first summer before deciding which way to proceed. I wasn't...
As I understand it canadian frames aren't stamped. My 1930 A is canadian and isn't stamped. The Robertson screws are another tell tale sign. Phil
Check out this utube video. [MEDIA] Phil
I remember when I was a junior in high school shop one of the seniors brought in a kart with a 650 bsa engine and transmission on the back, he...
Cool kart, is it a functional clone. Phil
[ATTACH] [ATTACH] I moved the battery box to the passenger side and used the Boling brothers model a brake and clutch pedal assembly with the...
I agree this would be the easiest route, but this would mean buying another used transmission with the risk involved plus the cost and shipping. I...
Thanks for the tips, I've looked at there sites but they don't seem to have a lot of nwc parts. I will have to contact them and see if they have...
I've pulled my T5 out of my model A to address the grinding going into 4th. I'm going to go ahead and replace the synchronizers and bearings when...
I ordered his tripower kit about 3 years ago. It went together really well and works better than expected. I ordered some gaskets and screws...
46/47 Chev from speedway. They feel like good quality. The wiring harness came [ATTACH] with the third brake light circuit so I reused the tail...
:D
No I believed you. I've been watching the machining u tube videos and have an appreciation of the set up times for custom work. I've been...
:eek::eek:
You might post your question on the rebel thread....
When I did a removable dash years ago I used 2 4 pin trailer plugs. I made sure to reverse one set so they could not be miss connented. Phil
I'd have to find my bill but I'm pretty sure this is the one I have or similar. https://www.ebay.ca/itm/153482135028 With this bracket....
I put in one of those Denso Hot Rod mini alternators and modified the speedway bracket.[ATTACH] Phil
You will have to wait and see but the crank isn't necessarily going to be drilled for a pilot bearing. Phil
I use 303 vinyl protector on my 18 year old convertible roof and it still looks great. I did my model A insert in the spring and it did a good job...
I'm not sure how serious you are but I think that's a great idea. I love an actual magazine but I'll read it maybe 3 times. After that I can't...
Looking at my model A repair book (published 1931) the removal description makes it sound like there are studs in the body. Unless you're going...
Separate names with a comma.
The Jalopy Journal
