The Jalopy Journal
Morning, Thanks for the reply. You would'nt happen to know what it weighs and the angle of the shocks? Thanks, Marc
Just checking for anyone who has a 33 Willys to see what rear coil over spring rate is working for you .Street driven, SBC, 200/4R fiberglass...
With my 40 Plymouth I'm also at about 8-9 degrees, works fine, till I tried raising the rear about 1"-1 1/2", intant wobble at 35 mph soon as i...
That’s what I did on my 40 Plymouth, worked fine . Didn’t think the door jams were that strong on this, I’ll check that out before I do it. Thanks
Body is braced up pretty rigid , steel tube inner frame,not a light weight race body, i can lift it up off the frame a couple inches by myself...
When you’re old and live in the country, hard to get guys, even enticing them with beer and pizza, plus will probably have to take it off and on a...
The body is molded around the frame, can’t slide straps underneath without lifting the body about 6 inches. I think I’ll be fine, but just seeing...
About to remove glass body off, (cab only, tilt front end) and wanted someone that has actually done this if this should be a safe attack at it....
thanks, yeah the plastic reservoirs are ugly, as for room ,the pics make it look tighter than it is,and with the dash board on it covers the...
Working on 33 model 77 and wondering if anyone has found a 7/8" disc/disc tandem master cylinder other than Wilwood. Would rather pay $50/$60 than...
Thanks for the ideas, should have searched the H.A.M.B. first I guess. I used the Champion 3 row mustang radiator in my 40 coupe and it it cools...
Have a new project car, 33 Willys glass car. Not much room for anything,including me. Having a hard time finding a radiator to fit. Yes, I've...
Hi, ended up using the GM 11” rotors and keeping the metric calipers , just had to fabricate up some caliper mounts. Really helped my stopping...
Picked up 33 Willys fiberglass roller lately and looking to find out what headers fit decently. SBC for motor. Like fenderwells but don't know if...
The body was from Heritage Hot Rods in Illinois. Steele didn't have anything. Couple other manufacturer's had a couple possibilities , but will...
That should give me enough options. Thanks
thanks for your info... i'll check out Metro.
Just picked up 33 willys glass project car (roller) from a guy retiring from hot rodding and having a hard time finding the glass rubber seals for...
Looking at a friends project he bought and has stored for 15+ years and has not did anything to it since. Wondering if anybody is familiar with or...
I think I'll bolt on the parts they send and see what it looks like. Unless the mid size GM calipers are alot bigger than the Metrics, I think it...
Finished my 40 plymouth rod project two years ago. I bought the Speedway straight axle kit with the 9 1/4" Mustang ll/Pinto rotors with GM Metric...
I have the same axle on my 40 Plymouth and I set the caster at about 8 degrees and I still get the death wobble at about 40 if I hit the right...
Separate names with a comma.