The Jalopy Journal
Or Canada
My battery is inside but I put the hardwire on the bulkhead connector. Tucks up when not in use but can charge with doors closed. [ATTACH]
Jim at Interior Cam Supply, Salmon Arm.
Shadbolt parkerized one of their old cams a few years ago but I don't think they're is still doing stuff but there is another guy I believe in...
So it should be new? :eek:
I've watched a few of his videos, great non-condescending attitude.
I am pretty happy with the Deutsch connectors. I used them everywhere on my car. Not cheap, I used the solid barrel pins. [ATTACH]
What about putting them in the tilt front, low under the headlights?
Me three.
I had the same problem, long time to warm up and then wouldn't maintain temps driving. I ended up filing the manifold and using some right stuff...
Ah, thanks. See it now.
Shouldn't your safety wire look like this? [ATTACH]
x2
Not cheap but they work amazingly well.
I have a 250i dynoing HD's. I call it the "room of disappointment" :D
[ATTACH]
After sanding to 5000 [ATTACH] Made polishing very easy [ATTACH]
My parents never got divorced because no one wanted the kids :)
Yes it happens :( [ATTACH]
Looks like they fit a reversed eye.
^^^^^this
I've used Cerakote cold spray ceramic. Did it at home like paint. It's held up well.[ATTACH]
I have the same panel with a kill switch but I ran power for clock and radio pre-sets thru a separate switch. Resetting the clock isn't so bad but...
https://www.mgchemicals.com/category/grease-for-electronics/electrically-conductive-grease/
Why not drop some more sizes? I just went through this with triple big 97's that were supposed to be jetted close for my combo. I'm down 9 sizes...
There were actually 2. They were on the top of 4 post lift. Owner had moved the 2 on the bottom.
I was dealing with same issue. Turned out my pcv was in one of the rubber grommets with a slot. Installed a metal one and problem disappeared.
And sometimes it's just inferior metal in my opinion. Maybe 3 hrs on this when I decided to change cams. I dodged a bullet.
I used this one https://www.summitracing.com/parts/bra-1777cw#applications
Separate names with a comma.
The Jalopy Journal
