The Jalopy Journal
Good evening and thanks for the answer, it's really appreciated. It was a bit of fun indeed but what i did to make things easier was to slide the...
Yes thank you. I manage to print the How to instal the mechanical advance plates and figure out how to put the sprins on though the pictures are...
Good afternoon fellow members. Some news from across the ocean !!! I finally received my gear, washers and springs from F.IE's mr Miller who was...
Hi guys. Answering to the last replies, the cap on the last post i shared isn't mine. It's mr Chaumont Bugatti's cap that he sent me pictures of...
Good afternoon. I have a bit of time so i'll pass on a few informations i got from mr Miller and mr Chaumont, a man specialized in magnetos, maybe...
Good evening members. Just a quick word to say that i'm in contact with mr Miller (F.I.E), he gave me explanations regarding the rusty condenser...
Hi and thanks a lot for the answer. I will do so. Have a good day and thanks to you all.
Hi mister, thanks for your answer. I emailed Magsarus, Mason, Alky digger and FIE to get their opinion on this issue and the availability of the...
I come back to you regarding the infos you gave me. The mag has a 20 degrees advance mechanical plates and is supposed to have rare-earth magnet...
Hello and thanks for your input. it's getting a bit clearer for me as all the infos you guys gave me seem to converge to the same conclusion. I...
Yes i've read that oil viscosity might put some more stress on the gear especially if asking to much on the engine when its oil is still cold but...
I'm gonna need a new gear and maybe a new condenser to stay on the safe side, would you recommand any shop ? DonZig, Alkydigger, Magsarus...
Yes i think so. dialed in the mag with the buzz box, tightened the nut, checked the advance with the strobelight and thightened the hex nut a bit...
Hi Eddy. Thanks for the input. here's the holding clamp i used, it does the job pretty well regarding all the crap i had previously. [IMG] The...
Fellow members good afternoon. Here's the message i sent to Joe Hunt Magneto regarding problems i encountered lately. I didn't get any answers yet...
Thanks for the procedure Jim. I'll recheck what i have done very soon and post the result. Hopefully with all those infos, i should be able to get...
Hi guys, thanks for your answers, looking forward to seing the pictures of your set up 427 Sleeper, i plan on changing the plug wires too and yes...
Here's a picture of the position of the rotor, having the cylinder 1 at TDC. Let me know what you think about it and if you have pictures thatt...
I bought the mag brand new at Joe Hunt and it has 24 degres of mechanical advance. I'll post a picture of the rotor position at TDC. I tried to...
Hi Harv, thanks very much for the answer. I used the buzz box to get the closed position on number 1 cylinder at TDC but doing so, it was very...
Good morning members. It's been quite a while since i updated my rebuilding of the 32. I'm in the process of reassembling the body to the chassis...
Good afternoon members. I'm about to finish the wiring of the Joe Hunt magneto and tach converter to get the revs infos on my Classic Instrument...
Hi. Glad this request helped you too, and again thanks to the members. Have a good weekend. Be safe.
Hi Bill. Thanks for the answer. Have a good day.
Thanks a lot for your infos, i'll keep those references, might use them sometimes. Rod.
Hi guys, thanks for the help. I think i'm over thinking this issue a bit but i want to built (or shall i say rebuilt as the first version was very...
The Walkerradiator could be moved back but then i'll have to modify the the lower attachements that are not horizontal like the upper ones..and...
Separate names with a comma.