The Jalopy Journal
Demon carb just came off my SBF, ran fine and no leaks I just swapped motors and will likely never use this carb because I don't know anything...
Got this door here that needs to go. There's a little surface rust that really stands out in these pictures. A light sanding would clean it up....
Got this visor along with the car and I'll never use it and it's taking up space. It's in good shape no dents or rust, has been painted matte...
Thanks for the info guys, I knew it'd be a quick answer if I asked here!
I happened across this picture on the internet and the story attached to the car has no information on these headlight trim rings. I assume...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] I've decided to put the '48 up for...
It's slightly off topic from the car world but I run a small wood and metal furniture fab shop in Wyondotte and I need to hire a couple people....
I don't know if they're art but it's something I make and sell. [ATTACH] Posted from the TJJ App for iPhone & iPad
To answer the OP's question, a buddy just used some in his froze up nailhead (former marine engine) that had some heavy rust in the cylinders and...
See, there's always something worse.
Just in case any comes across this thread having similar problems I got it solved. Decided the spark issue had to be a problem and swapped the...
Good seein' ya Saturday. Maybe the next show I'll get to check out the truck again!
I feel like I've beat the vacuum horse to death. I'm gone try one last thing and see if I can have any luck with a smoke machine. Posted from...
Yeah, the ports are all plugged up. One of my buddies just mentioned that it sounds like it skipped time so maybe I'll look in to that. Posted...
I'm just off Michigan and beck. Posted from the TJJ App for iPhone & iPad
The ignition module is an ignitor II as is the coil. Posted from the TJJ App for iPhone & iPad
I tried the smoke trick, thought for sure it would show me something but I couldn't seal the carb up tight enough. So if the starting fluid...
The base plate is good, I took the plate out used two gaskets and sprayed it with starting fluid again and same thing. I should say I'm spraying...
I added the plate because it was sucking air between the base plate on the carb and intake manifold. Turns out it does it with or without that...
It's and edelbrock performer intake. Posted from the TJJ App for iPhone & iPad
The adapter is just a thin piece of steal so the base plate of the car matches the intake properly. Posted from the TJJ App for iPhone & iPad
So I can stall it out spraying starting fluid between the carb and intake. I put the adapter plate with a gasket on top and bottom of the plate,...
It did have 3 ports, PVC, trans, advance. I'm gonna get the starter fluid out when I get home and see what happens. I'll probably swap the plugs...
Oops. Tha should have been .040
It's a holley style carb. The hissing is coming from inside, it's a sharp distinct sound that gets a little quieter once the engine warms up.
Shit happens, just means I'll have to find trouble some other way while we're out there.
I only have my vaccum advance and trans line to connect. The Brake booster port in the back is plugged. Both ports in the front are used by the...
I can.
I don't see any fuel dripping. I thought maybe I was having a boil over issue, bad float, etc. so I was looking for that, I've managed to get it...
Separate names with a comma.