The Jalopy Journal
I don't understand why it has to be so messy. The instructions say to use light coats. I suppose a combination of spraying and brushing could be...
I have never sprayed it. I have not seen a reason to spray it when it is so brush-able. I would spray it if a reason to should arise. Spraying or...
Ya it will fit. Upgrading the engine to a pressurized oil system 6 banger and a 5-speed will make it more enjoyable to haul it around though.
http://www.chiefautomotive.com/welding/spot-welders/MULTISPOT-MI200T/ Might be out of a hobbyists budget
I would try annealing the copper washer.
THAT... is cool.
More room for signage.
It's a California transplant disposal mechanism.:p
Their web site says up to 12 weeks. I have never dealt with them.
Rage extreme may cost more than other fillers but by the time you subtract the difference, the cost is a drop in a bucket compared to the rest of...
SISSY... Not, I don't want melanoma. Most people don't think about that.
Keeping the design compact is my guess.
The caveat to all of this is to follow the paint manufacturers recommendations. And that recommendation is to coat bare steel within 8 hours of...
I agree. The epoxy I use has a five day window. The paint rep says to wait at least 3 days for least amount of shrinkage.
I agree but...#3000 (3m trizac) can create a nice uniform semi gloss appearance but it will not reach into the tight places. Those areas will...
Sorry to here that wrench. Hope you bounced back.
I'll take wood over illegal propane bottle in my shop any day.
nice
I'd use an old school pot belly stove with a piece of asbestos between it and the wall.
Another thing I use is a 4 foot led shop light but like most leds , they dont like being dropped.
I don't know if one light is the answer but I use the crap out of my rechargeable dewalt with the swivel head.
I totally agree about the scuff pad. I always cut the scuff pad into smaller pieces instead of tearing them. Gotta keep that tender edge in tact....
No kidding... I wait until they go downhill before I hi-jack a little. Sorry, if your pointing at me.
Retired RR people got money to spend.
It gonna be.
Not exactly. ;) [ATTACH]
[ATTACH] I just finished a 53 chebby 3100 cab. I bolted casters to two separate pieces of 4 inch channel iron and bolted them to the cab mounts...
I have one of those. A friend gave it to me. It was in his welding shop when he bought it. It was used for building up bearing surfaces for...
I harvest the little piece of stainless steel out of old school windshield wiper blades for all kinds of applications. I grind them down to points...
The only thing that satisfies me is sandblasting+epoxy+paint. Not always an option.
Separate names with a comma.