The Jalopy Journal
flynbryan48....so there's your answer(s). I'd bet all those opinions were helpful.:rolleyes: Just throwing out a bit of sarcasm....sorry. Best...
Glad you're OK! Sorry to hear of the incident and hope you can work something acceptable with insurance. I followed your build and was always...
Sweetened the deal with a price drop. Now $5800 Cash. Really solid foundation for a great hot rod. If you want more photos let me know. Lynn...
Still available. Lynn
Offers? One or all? Lynn
To the Top Lynn
Still needing advice and info about a clutch disc and pressure plate that might work with my flywheel. See post #659 above with my questions and...
Good looking Tudor! The way you describe it, it sounds a lot like the '31 Tudor I have. I'll give you the edge though as it sounds like you have a...
I don't have a '32, I have a Model A Tudor and if memory serves I can only handle about 9" overall width measuring at the sidewall "bulge" to keep...
I have my eye on a different project, so give me a call. Lynn Winter (573) 286-3335 Cell (573) 788-2574 Home/Shop - Land Line
Still holding my neighbor off from scrapping this. Turning this to scrap would be a shame. Contact Terry (the owner) to talk or if you have...
Roadster weather has arrived.....at least for today. Lynn
Call for package pricing! Lynn
To the Top.....Not many of these made! Lynn
Bump.....Feel free to make an offer on one or all. Lynn
To The Top _ You would have to look long and hard to find another A this solid. I have accumulated additional parts that I had thought of using...
AnimalGuy....I sent a PM to you about an axle I have that might be of interest to you. Lynn
I think you hit the nail on the head, ^^^^^ but it's hard to come to that realization and really consider moving a car along to someone else to be...
Roadster weather just around the corner here in the Midwest! Lynn
So, as best you might remember, I guess the inner bearing race was sized directly to the Ford spindle diameter and seated by the "step" on the...
Careful use of a chisel as several have suggested. Or, in some cases, I use a small scrap piece of thick plate that has a nice, crisp 90* edge. A...
To the Top
Thanks. Good, first-hand information. If there was no press-on adapter for the inner wheel bearing and grease seal, can you share how that was...
I'd agree that it seems the bearing adapter not needed is where the difference in width might be, but the large diameter of the adapter is where...
Roadster Supply advertises a front disc brake kit for '37-'41 Ford spindles that states a track width 1" narrower than other disc conversion kits....
Well, so far everyone has told the OP why his idea is flawed rather than suggesting ways or people who will make his idea possible. No, I don't...
I use DOT5 fluid in my 2 hot rods and my FED. One hot rod originally had DOT3 when I built it but made the switch when I blew it apart for paint....
Separate names with a comma.